Universal Electronics 4-DEVICE Universal Remote Control manual Installing Batteries

Page 7

Use TV/VCR to switch the TV input to view video or TV programs. For amplifiers/receivers, use this key to select input or output.

In all modes except CBL, use these keys to control a VCR, DVD player, or PVR. To record in the VCR mode, press REC twice.

In the CBL mode, use these keys except REC to control VOD (Video On Demand), if available.

INSTALLING BATTERIES

❶

❷

❸

1.On the back of the remote control, push the tab and lift off the battery cover.

continued on next page...

7

Image 7

Contents Atlas Cable 4-DEVICE Table of Contents Code library for popular video and audio devices IntroductionFeatures and Functions Use Setup for all programming sequences Key ChartsUse Guide to display the program guide Use CH+ or CH- to select the next higher or lower channel Press Mute once to turn the sound off or onInstalling Batteries Programming Device Control Installing BatteriesAUD TV/VCR Setup Codes for Audio Receivers Setup Codes for Audio AmplifiersMANUFACTURER’S Codes GPX Setup Codes for Cable ConvertersSetup Codes for DVD Players ABCCCE Setup Codes for VCRs and PVRsLXI HI-QKEC KLHSTS NECTMK AOC Setup Codes for TVsCXC NTC JCBKTV NADSSS Setup Codes for TV/VCR Combos Searching for Your Code Press Setup once to lock in the codeChecking the Codes Enter 9 8 2. The CBL key will blink twice Programming ID LockTurn on the cable converter Enter 9 8 2. The CBL key will blink four timesEnter 9 7 Press CH- once. The CBL key will blink four times Programming Channel Control LockPerform steps 1 and 2 in the above section Press Power once To Program The Master Power KeyTo Clear The Master Power Key To Operate The Master Power KeyTV VCR RE-ASSIGNING Device KeysExample Programming a Favorite Channel Using MacrosTo Clear a Macro To Unlock All Volume Control Global Volume Unlock Changing Volume LockTo Lock Volume Control To One Mode Global Volume Lock Problem TroubleshootingSolution M4030 04/02 Additional Information