Universal Electronics 4-DEVICE Universal Remote Control manual

Page 6

FEATURES AND FUNCTIONS

Key Charts (continued)

After programming, press MACRO once to run a macro (see Using Macros on page 26).

Use EXIT to exit out of your cable converter’s menu and guide.

Use A, B, or C to access additional cable features (see your cable converter’s manual).

Use DAY+ (or DAY-) to move a day forward (or back) on your cable converter’s program guide.

Use VOL+ (or VOL-) to raise (or lower) the audio volume.

Press LAST once to recall the last channel. For PVRs, use LAST to select live or recorded video.

Use FAV to cycle through your favorite channels stored in your cable converter.

Press MUTE once to turn the sound off or on.

Use CH+ (or CH-) to select the next higher (or lower) channel.

For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station.

Use the keypad (1~ 9, 0, , and ) to directly select channels (e.g., 09).

Press ENTER once after entering channel numbers on some TVs.

For amplifiers/receivers, use the keypad to select inputs 1 through 10.

Use BYPASS to view other video sources (A or B) instead of cable.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Atlas Cable 4-DEVICE Table of Contents Introduction Code library for popular video and audio devicesFeatures and Functions Key Charts Use Setup for all programming sequencesUse Guide to display the program guide Press Mute once to turn the sound off or on Use CH+ or CH- to select the next higher or lower channelInstalling Batteries Installing Batteries Programming Device ControlAUD TV/VCR Setup Codes for Audio Amplifiers Setup Codes for Audio ReceiversMANUFACTURER’S Codes ABC Setup Codes for Cable ConvertersSetup Codes for DVD Players GPXSetup Codes for VCRs and PVRs CCEKLH HI-QKEC LXINEC STSTMK Setup Codes for TVs AOCCXC NAD JCBKTV NTCSSS Setup Codes for TV/VCR Combos Press Setup once to lock in the code Searching for Your CodeChecking the Codes Enter 9 8 2. The CBL key will blink four times Programming ID LockTurn on the cable converter Enter 9 8 2. The CBL key will blink twiceProgramming Channel Control Lock Enter 9 7 Press CH- once. The CBL key will blink four timesTo Operate The Master Power Key To Program The Master Power KeyTo Clear The Master Power Key Perform steps 1 and 2 in the above section Press Power onceRE-ASSIGNING Device Keys TV VCRUsing Macros Example Programming a Favorite ChannelTo Clear a Macro Changing Volume Lock To Unlock All Volume Control Global Volume UnlockTo Lock Volume Control To One Mode Global Volume Lock Troubleshooting ProblemSolution Additional Information M4030 04/02
Top Page Image Contents