Universal Electronics 4-DEVICE Universal Remote Control manual To Clear a Macro

Page 27

To Clear A Macro:

1.On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

2. Enter 9 - 9 - 5.

3. Press MACRO once.

4.Press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

NOTE: A macro will be cleared in the order it was originally stored.

27

Image 27

Contents Atlas Cable 4-DEVICE Table of Contents Code library for popular video and audio devices IntroductionFeatures and Functions Key Charts Use Setup for all programming sequencesUse Guide to display the program guide Use CH+ or CH- to select the next higher or lower channel Press Mute once to turn the sound off or onInstalling Batteries Programming Device Control Installing BatteriesAUD TV/VCR Setup Codes for Audio Amplifiers Setup Codes for Audio ReceiversMANUFACTURER’S Codes GPX Setup Codes for Cable ConvertersSetup Codes for DVD Players ABCCCE Setup Codes for VCRs and PVRsLXI HI-QKEC KLHNEC STSTMK Setup Codes for TVs AOCCXC NTC JCBKTV NADSSS Setup Codes for TV/VCR Combos Searching for Your Code Press Setup once to lock in the codeChecking the Codes Enter 9 8 2. The CBL key will blink twice Programming ID LockTurn on the cable converter Enter 9 8 2. The CBL key will blink four timesEnter 9 7 Press CH- once. The CBL key will blink four times Programming Channel Control LockPerform steps 1 and 2 in the above section Press Power once To Program The Master Power KeyTo Clear The Master Power Key To Operate The Master Power KeyTV VCR RE-ASSIGNING Device KeysExample Programming a Favorite Channel Using MacrosTo Clear a Macro To Unlock All Volume Control Global Volume Unlock Changing Volume LockTo Lock Volume Control To One Mode Global Volume Lock Troubleshooting ProblemSolution M4030 04/02 Additional Information