Sunwave Tech 3815, SRC-3810 manual Selecting a Code Automatically

Page 25

Code Menu

Note: Some codes are designed to operate more than one model. It may take several tries to find the code that works with your unit.

6.Press to confirm the selection and save the settings or click to exit.

Note: When you enter the Manufacture Code and an 'ERROR’ message is displayed, it could be for two reasons:

1.That code number doesn't exist in the Manufacture Code table yet.

2.That code number is not in the range of the Manufacture Code table reserved for the default device screen

Selecting a Code Automatically

1.Turn on the target device you want the SRC-3810/3815 to control.

2.Press the device hardware button (for example TV).

3.Point the SRC-3810/3815 at the target device.

Press the AUTO button. An “AUTO” message displays while the SRC-3810/3815 automatically cycles through the codes. Wait for the device to turn on and then press the POWER button or AUTO key to stop the automatic search.

The last tried code is displayed in the upper right-hand corner. Test this code by pressing the POWER button .

If it doesn't work, you may need to press the tuning down

key and try a few of the previously scanned codes.

4.Press to confirm the selection and save the settings or click to exit.

19

Image 25
Contents 031021 SRC-3810/3815Page Preface Table of Contents Iii Page Following list identifies the SRC-3810/3815’s key features SRC-3810/3815 FeaturesIntroducing the SRC-3810/3815 Unpacking the SRC-3810/3815 Backlight press this button to turn on the LCD backlight Identifying ComponentsFor SRC-3815 Remote Control Installing Batteries Installing IR-extenderBattery Indicator Getting StartedBattery Icon Battery Tips and PrecautionsAbout the Touch Screen Touch Screen PrecautionsTurning the Touch Screen On Please read the following instructions carefullyEntering the Setup Menus Using Hard KeysTouch Screen Buttons Entering the Setup Menus Navigating the Setup MenusFallowing illustration shows the setup menu tree Device Menu Setting Up the SRC-3810/3815Follow these steps to create a new device Creating a New DeviceFollow these instructions to edit a device label Re-Labeling DevicesAddr Setting RF Address SRC-3815 Device Menu Deleting Devices Code Menu Manually Selecting the Code Using Pre-Code to Program DevicesSelecting a Code Automatically Before Using the Learning Function Using Code Learning ModeLearning from Another Remote Control Erasing Key Codes Erasing Device Codes All unrecognized codes should be sent to this address Debugging Device CodesCode Menu LCD Layout Using Macros Follow these steps to create a new macro Creating a New MacroPress the DVD play key Follow these steps to delete a macro Deleting a MacroFollow these steps to view the steps of a macro Viewing a MacroSetting a Quick CH Setting Quick CHsMenu, press and to scroll through the menu options Follow these steps to create a new Quick CHFollow these steps to delete a Quick CH Deleting a Quick CHRelabeling a Quick CH Using the Transmission Feature Miscellaneous Menus Setting the Date and Time Setting the Backlight On Time Setting the Power Down TimeSetting the Beep Signal Checking the Version Number Resetting the SRC-3810/3815 to Factory DefaultsPage Selecting a Device to Control Controlling DevicesViewing the Macro Key Alternating Touch Screen PagesUsing the Quick CH Buttons Controlling Devices Using the AUX KeyModel SRC-3810/3815 Appendix a SpecificationsUSB cable Appendix B AccessoriesAdditional RF IR-extender SEL-6000 for SRC-3815 IR Blaster Cable SRC-IR for SRC-3815Troubleshooting Tables Appendix C TroubleshootingRF mode Troubleshooting Tables