Sunwave Tech 3815, SRC-3810 manual Troubleshooting Tables

Page 57

Troubleshooting Tables

Macro does not work.	Be sure to aim the SRC-3810/3815 at the
	devices while the macro commands are
	being sent.
	Macro was not properly set up. Repeat
	macro set-up procedure (page 27).

IR LEARNING is not	Replace batteries in the SRC-3810/3815
successful.	and the remote you are trying to
	configure.
	Keep distance between remotes to
	about 2~4 inches.
	Do not learn near an incandescent lamp.
	Memory capacity is full (48 keys for each
	of 16 models).
	The learning process has no errors, but
	you still can’t control your AV devices:
	repeat the learning procedure again. If
	you still can’t solve the problem, use the
	debug code feature and email codes to
	SUNWAVE (page 24).
	Original remote might not be compatible
	with learning procedure.

A button of your	Some remotes issue multiple commands
existing remote	when a button is held down. Please be
performs two or more	sure to teach different buttons of SRC-
functions	3810/3815 for these different commands.
	Each button of SRC-3810/3815 can only
	learn one command.

The LCD screen turns	The SRC-3810/3815 is preset
off.	automatically to switch the LCD off after
	the Power Down time. Just tap the
	POWER button or Backlight button to turn
	the SRC-3810/3815 back on again. You
	can also reset the Power Down time
	period (page 38).

51

Image 57

Contents 031021 SRC-3810/3815Page Preface Table of Contents Iii Page SRC-3810/3815 Features Following list identifies the SRC-3810/3815’s key featuresIntroducing the SRC-3810/3815 Unpacking the SRC-3810/3815 Backlight press this button to turn on the LCD backlight Identifying ComponentsFor SRC-3815 Remote Control Installing Batteries Installing IR-extenderBattery Indicator Getting StartedBattery Icon Battery Tips and PrecautionsAbout the Touch Screen Touch Screen PrecautionsTurning the Touch Screen On Please read the following instructions carefullyUsing Hard Keys Entering the Setup MenusTouch Screen Buttons Entering the Setup Menus Navigating the Setup MenusFallowing illustration shows the setup menu tree Device Menu Setting Up the SRC-3810/3815Follow these steps to create a new device Creating a New DeviceFollow these instructions to edit a device label Re-Labeling DevicesAddr Setting RF Address SRC-3815 Device Menu Deleting Devices Code Menu Manually Selecting the Code Using Pre-Code to Program DevicesSelecting a Code Automatically Before Using the Learning Function Using Code Learning ModeLearning from Another Remote Control Erasing Key Codes Erasing Device Codes All unrecognized codes should be sent to this address Debugging Device CodesCode Menu LCD Layout Using Macros Follow these steps to create a new macro Creating a New MacroPress the DVD play key Follow these steps to delete a macro Deleting a MacroFollow these steps to view the steps of a macro Viewing a MacroSetting a Quick CH Setting Quick CHsMenu, press and to scroll through the menu options Follow these steps to create a new Quick CHFollow these steps to delete a Quick CH Deleting a Quick CHRelabeling a Quick CH Using the Transmission Feature Miscellaneous Menus Setting the Date and Time Setting the Backlight On Time Setting the Power Down TimeSetting the Beep Signal Checking the Version Number Resetting the SRC-3810/3815 to Factory DefaultsPage Selecting a Device to Control Controlling DevicesViewing the Macro Key Alternating Touch Screen PagesUsing the Quick CH Buttons Controlling Devices Using the AUX KeyModel SRC-3810/3815 Appendix a SpecificationsUSB cable Appendix B AccessoriesAdditional RF IR-extender SEL-6000 for SRC-3815 IR Blaster Cable SRC-IR for SRC-3815Troubleshooting Tables Appendix C TroubleshootingRF mode Troubleshooting Tables