Sunwave Tech 3815, SRC-3810 manual Using the Transmission Feature

Page 41

Using the Transmission Feature

After you have set up the QUICK CH, press any QUICK CH (e.g., “NEWS”) to open the QUICK CH screen. Using the CH+ and CH- to scroll through all channels stored in this

QUICK CH .

Press that QUICK CH (e.g., “NEWS”) again to exit the QUICK CH screen.

Using the Transmission Feature

The SRC-3810/3815 can transmit data to a PC with the optional USB-UART cable. You can download firmware upgrades from the Internet or transfer configuration data.

Enter the setup menus, scroll to TRANS and press to enter the transmission menu.

Before you use this feature to transfer data with your PC, you must connect the optional USB-UART cable. Refer to Appendix B for more information.

1.Press or to select TRANS.

35

Image 41

Contents 031021 SRC-3810/3815Page Preface Table of Contents Iii Page Introducing the SRC-3810/3815 SRC-3810/3815 FeaturesFollowing list identifies the SRC-3810/3815’s key features Unpacking the SRC-3810/3815 Backlight press this button to turn on the LCD backlight Identifying ComponentsFor SRC-3815 Remote Control Installing Batteries Installing IR-extenderBattery Indicator Getting StartedBattery Icon Battery Tips and PrecautionsAbout the Touch Screen Touch Screen PrecautionsTurning the Touch Screen On Please read the following instructions carefullyTouch Screen Buttons Using Hard KeysEntering the Setup Menus Entering the Setup Menus Navigating the Setup MenusFallowing illustration shows the setup menu tree Device Menu Setting Up the SRC-3810/3815Follow these steps to create a new device Creating a New DeviceFollow these instructions to edit a device label Re-Labeling DevicesAddr Setting RF Address SRC-3815 Device Menu Deleting Devices Code Menu Manually Selecting the Code Using Pre-Code to Program DevicesSelecting a Code Automatically Before Using the Learning Function Using Code Learning ModeLearning from Another Remote Control Erasing Key Codes Erasing Device Codes All unrecognized codes should be sent to this address Debugging Device CodesCode Menu LCD Layout Using Macros Follow these steps to create a new macro Creating a New MacroPress the DVD play key Follow these steps to delete a macro Deleting a MacroFollow these steps to view the steps of a macro Viewing a MacroSetting a Quick CH Setting Quick CHsMenu, press and to scroll through the menu options Follow these steps to create a new Quick CHFollow these steps to delete a Quick CH Deleting a Quick CHRelabeling a Quick CH Using the Transmission Feature Miscellaneous Menus Setting the Date and Time Setting the Backlight On Time Setting the Power Down TimeSetting the Beep Signal Checking the Version Number Resetting the SRC-3810/3815 to Factory DefaultsPage Selecting a Device to Control Controlling DevicesViewing the Macro Key Alternating Touch Screen PagesUsing the Quick CH Buttons Controlling Devices Using the AUX KeyModel SRC-3810/3815 Appendix a SpecificationsUSB cable Appendix B AccessoriesAdditional RF IR-extender SEL-6000 for SRC-3815 IR Blaster Cable SRC-IR for SRC-3815Troubleshooting Tables Appendix C TroubleshootingRF mode Troubleshooting Tables