Creating a New Macro
Follow these steps to create a new macro:
1.Press 
or 
to select NEW.
2.Press 
.
3.Press the device key you want to use for this macro (for example TV), and then press any key to define as the macro key. You hear three beeps to indicate that macro creation mode has started.
Note: If you select a key that already has a macro or code stored in it, the new macro will replace the old macro.
4.Press the key or button sequence that you want to record.
5.Press 
. You enter the Delay and Save screen. Do one of the following:
•Enter the number of seconds you want to delay between each command. For example, if you want a six second delay between turning on your TV and then turning on your VCR, press ‘6’.
•Press 
to save the macro and exit macro creation mode.
28