Chapter 3: Programming
is 1 minute.
To set the intercall Delay time, press the number keys corresponding to the number of minutes and press ENTER, repeat to enter seconds.
Use the number keys.
Press ENTER.
If an incoming telephone call is made to the Boat Remote during the Intercall Delay (in between its dialing of subsequent telephone numbers to report an alarm), it will answer the incoming call and immediately report any existing alarms. The manner in which the incoming call is answered depends upon whether or not TAD (Telephone Answering Device) is enabled or disabled:
If TAD is enabled, rings until answer will be 1.
If TAD is disabled, rings until answer will be 10.
*Refer to Rings Until Answer and TAD sections in this chapter.
Dialing Method
Boat Remote can dial out in either pulse or Touch Tone™. Select the type of dialing depending upon the type of service provided by your telephone company. The display will prompt you to choose Pulse or Tone dialing. The default is Tone. Toggle between pulse and Tone by pressing the MODE key while in the Set System menu. Press ENTER when your choice is displayed.
Press MODE.
Press ENTER.
31