Boat Remote User’s Manual
INPUTS
In preparing the Boat Remote to sense an alert condition several parameters must be configured for each input. The following paragraphs describe these important parameters.
Input Mode: Active, Off, Status Only
An input configured in the Active Mode will be enabled to dial out for alarms, show its status in the scrolling display, and also have its status reported during
An input configured in the Off Mode will be totally disabled. It will not dial out for alarms, show its status in the scrolling display, nor be reported during a remote status report.
An input configured in the
Input Dial Out Phone Selection
The Input Dial Out Phone Selection is the list of phone numbers that will be called if an alarm occurs for that input. This list may include one or more of the phone numbers programmed by you for the Dial Out Phone Numbers
Recognition Time (not for Bilge #1 & #2)
This is the programmable waiting period to determine if an alert condition has persisted long enough to be considered a valid alarm. If the sensor returns to normal within the Recognition Time, then no alarm will occur.
In addition to these parameters each input requires levels, time constraints, or other conditions for you to set. This section of the manual along with the local display will guide you through program- ming. Please read through this section before you begin to program. Consider the choices that follow for each input and how they apply to your needs.
To keep previous settings scroll to the next parameter with the down arrow key. To clear an input phone selection press ENTER before pressing any numbers for that phone selection, while in an Input menu. When changing a parameter press ENTER when your choice appears on the display. Press the down arrow one extra time, once you have reached the end of an input menu, to reach the idle screen.
42