HELIX DN9340E/DN9344E Remote Control Software
User Guide
11 Select Helix Serial Port from the Port Type drop down list.
12The Port Configuration window will now extend to include additional fields. In this window you will select and name a Helix Serial Port. Select the appropriate COM port from the drop down list.
13Rename the port name by clicking in the Port Name field, highlighting the existing text and typing in the new port name, for example, “Serial 01”.
14Click OK
. The new port appears in the Communications Ports list, under its new name.
15Assign the port name to the device by selecting the port and device from the Communications Ports and List of Devices, and selecting the port
name in the drop down list.
16Click OK
.
Your system should now be ready for online operation, as described in Section 7.6. Successful HELIX RCS/unit communication is indicated on the units by the yellow NETWORK LED illuminating.
38 of 65