HELIX DN9340E/DN9344E Remote Control Software
User Guide
8STORING/RECALLING MEMORY SETTINGS
The DN9340E and DN9344E HELIX Equalisers are provided with 32 User memories for storing frequently used Equaliser settings in
To enable you to quickly program both User and Preset memories, the HELIX RCS AddIn device has 64 equivalent ‘PC memory’ locations in which you can create and store varying equalisation settings for downloading to the physical unit. Alternatively, memories can be uploaded from the Unit to the equivalent PC locations.
The memory settings of a HELIX AddIn are viewed, edited, stored and recalled to/from Unit Memories in the Memory view. (Memory is not included as a button on the channel Navigation Strips as memory settings apply to the unit as a whole). For simplified global management, you can also read and write memories to/from multiple Units using the Memory Management Command of the FastNav® screen.
8.1Memory Working with Individual AddIns
To switch to the Memory view
Click on either the upper or lower Memory tab of the AddIn device.
The graph shows the overall frequency response of the memory settings
Memories are recalled and stored via the lower tab
Selecting a PC Memory at the upper Memory tab recalls settings to all Equalisation views
The Write All command programs both User and Preset memories
The graph of the Memory view is the same as the Home view, that is, it shows the overall frequency response of the current PC memory, which initially defaults to Memory 1 (equivalent to U01 at the Unit). The upper Memory tab shows the currently selected PC Memory while the lower Memory tab contains the online store and recall commands
50 of 65