Evolve Communications RD5000 Press the Advanced key to, Access the Extended, Function Screen

Getting Started

7b

7c

	Press the ADVANCED key to
	access the Extended
	Function Screen.
	To test codes, highlight a
	function from the list and
	press the SELECT key. Only
	functions which are also
	present on your original
	remote will work on your
	device.
	Press the Up / Down
	Arrow key to access
	additional functions.
	When you’re finished testing,
	press the Right Arrow key.
Note	When testing functions from the list, you must pick the correct function as on
	your original remote. There may be many other additional functions
	on the list that do not relate to your device. If the appropriate functions
	respond, you have found the right code.

7d

8

If the keys respond, highlight Yes and press the SELECT key then, go to step 8.

If the keys do not respond, highlight No and press the SELECT key. (repeat step 7b to test the next code)

Once a code is found that operates your device, basic setup is complete.

Press the Right Arrow key.

18 Setup Remote Control *Trademark