Evolve Communications RD5000 Alert Screens, No DirecTune* Device Found, Please setup DirecTune

Using the Remote

9. Alert Screens

The GUIDE Remote* has various alert screens that will help you to operate the remote smoothly. Below are some examples of the types of screens that you might encounter.

No DirecTune* Device Found

You will see this screen when you try to exit out of a menu and did not setup a DirecTune device.

Please setup DirecTune...

You will see this screen when you press an Interactivity key and did not setup a DirecTune device. This screen will also appear if you did not set up a DirecTune device before attempting to request promos.

Please setup DirecTune

You will see this screen when you try to tune

from within the	Program Listings and did not
set up a DirecTune device.
Note	To avoid seeing these screens, setup a DirecTune* device under the
	MENU key. (see page20 to setup DirecTune)

Time and Date Reset

You will see this screen when you install new batteries. You can set the time and date manually by pressing the Right Arrow key and going into the Set Time and Date section in the menu. For most accurate settings, we recommend that you log onto our Website and sync your remote.

48 Alert Screens *Trademark