Evolve Communications RD5000 manual Highlight Set Time and Date, Press the Select key

Using the Remote

Time and Date

The time and date are accurately updated automatically each time you sync your GUIDE Remote*. Additionally, you may set the time and date manually, for instance if batteries are removed and replaced.

To set the time and date manually, perform the following steps:

1	Press the MENU key and SELECT Remote Settings > Time and Date
	Highlight Set Time and Date
2
	and press the SELECT key.

Note	If you choose Display Time and Date you will only be able to view the time
	and date and not adjust them.

3

4

	Read and follow the
	instructions on the screen.
	Press the Right Arrow key to
	continue.
	Press the Up / Down Arrow
	key to adjust the numbers.
	Press the Left / Right Arrow
	key to change the cursor
	position. (blinking indicates
	cursor position)
	Press the SELECT key when
	you’re finished.
Note	When you see the alert screen: “TIME AND DATE RESET,” you can set the
	time and date as described in this section. However, we recommend that
	you sync your remote at www.GuideRemote.com for the most accurate
	setting.

42 Using the MENU Key *Trademark