Evolve Communications RD5000 manual Changing Modes

Using the Remote

2. Changing Modes

Set up all the devices you want to control with your GUIDE Remote*. Changing modes to control a device of your choice is fast and easy.

To change modes, perform the following steps:

1		Press the Mode Right or
		Mode Left key and a small
		popup screen will appear at
		the top of the remote screen
		indicating the current mode.
		Press the Mode Right or
2
		Mode Left key again to
		switch to different modes.
		Continue pressing the MODE
		keys until you find the device
		you want to control.
	Note	The current mode for your device is always indicated on the Channel and
		Promo Screens (see page 45).
	Note	If there are no devices setup in your remote and you press a MODE key, a
		“NO DEVICES” popup appears.
	Note	If more than one of any type of device is setup in your remote (i.e. 2 or more
		TVs or VCRs), they will be sequentially numbered (i.e. TV, TV#2, TV#3 or
		VCR, VCR#2, VCR#3, etc.). The devices will appear in the order that you
		set them up.

26 Changing Modes *Trademark