Fortinet 2 SXRC manual Down key to change the Drvc level, Display will instantly show the current

Operation

»memory name - The name of the current Global Memory Preset in use, if any are currently selected.

»vol= 00.0 db - The current setting of the Digital Remote Volume Control. You can select which amplifiers are controlled by this function. See the SXRC SETUP section of the manual.

»XX units - How many SX Series amplifiers are currently connected to the SXRC. If you have 4 but it only says 3...time to troubleshoot...or go fishing. Your choice.

»date display - Displays the current date in month-day-year format. Requires initial setup by you and then is kept up-to-date with internal backup battery. Described later in the SXRC SETUP section of the manual.

»time display - Displays the current time in 12 hour am/pm format. Requires initial setup by you and then is kept up-to-date with internal backup battery. Described later in the SXRC SETUP section of the manual.

You can freeze the scrolling display on any item in the DEFAULT menu by simply pressing

You can change the Digital Remote Volume

Control (DRVC) at any time when you are in the

DEFAULT menu. Simply press the UP key to ESC HOME ENT increase the volume level or press the DOWN

key to decrease the volume level.
When you press either the UP or	LOCK LEFT	SYS	RIGHT	MUTE
	AMP1			AMP2
DOWN key to change the DRVC level,	GAIN EQ LPF HPF PHASE KOMP
	v o l =		000d b
the display will instantly show the current
	MEM-1 MEM-2		MEM-3	MEM-4

Remote Volume Level.

The Digital Remote Volume Control has

an operating range of 0.0 dB to -30.0 dB. AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE

GAIN EQ LPF HPF PHASE KOMP

Each press of the UP key will increase the v oll=-30000d b
DRVC level .5 dB and each press of the	MEM-1	MEM-2 MEM-3 MEM-4

DOWN key decreases the DRVC level .5 dB.

PRESS &

HOLD Pressing and holding either the UP or

DOWN key will cause the DRVC level to ESC HOME ENT change rapidly.

The SXRC will pause on the DRVC level for 2 seconds after you have made your adjustment and then return to the previous

the HOME key.

ESC HOME ENT

DEFAULT menu item that was being displayed before you adjusted the DRVC.

Once you freeze the scrolling display you can manually select any item to view by pressing the

ESC HOME ENT ESC key. Each press brings up the next item in the DEFAULT menu.

If you want the display to start scrolling again,

simply press the HOME key. ESC HOME ENT

28 SXRC Remote Control