Fortinet 2 SXRC Example, Amp, Through the selections above and press, You See, ENT key to select

MEM-1MEM-2

You See

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

MEM-1MEM-2

MEM-3

60

MEM-3

60

Amp 2

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

MEM-4

9 0

MEM-4

3 0

9 0

MEM-4

Amp 2

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

00 0 0

MEM-4

Operation

Once the group you want to adjust is selected you will be able to choose from the following items (depending on LINK setting).

»GAIN »EQ »LO-PASS »HI-PASS »PHASE »MUTE

Example 1

Group-01 has two amplifiers in it, amp 1 has both channels gain set at 12.0 while amp 2 is at 0.0. When you select this group to adjust the gain you will see 12.0 in the display,the highest gain setting of the group.

Amp 1

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

1220 12 0

MEM-1 MEM-2 MEM-3

»KOMPRESSOR »KOMP. ADJ.

»GAIN RANGE »PINK NOISE

Use the UP and DOWN keys to scroll

through the selections above and press the

ESC HOME

When you try to increase or decrease the	MEM-1 MEM-2 MEM-3 MEM-4
		You See
gain setting of this group, nothing will	AMP1		AMP2
	LOCK	LEFT SYS	RIGHT MUTE
happen. Since the gain range is 12 dB	GAIN EQ LPF HPF PHASE KOMP
	1220		12 0
(0.0 dB to 12.0 dB) there is no way to
	MEM-1	MEM-2 MEM-3 MEM-4
increase or decrease the gain and

maintain 12 dB of difference between the amplifiers. The SXRC is maintaining the differences you set between the amplifiers.

ENT key to select. ENT

GAIN MENU - Here is where you adjust the selected group’s gain controls. All amplifiers in the group will be adjusted up or down when you adjust the gain control.

If each amplifier has different gain settings, the SXRC will display the gain level of the highest amplifier in the group . It also monitors and maintains any differences between channels or

Example 2

Group-02 has two amplifiers in it, amp 1 has channel gains set at 3.0 (Left) and 9.0 (Right) while amp 2 is at 6.0 (Left) and 3.0 (Right). When you select this group to adjust the gain you will see 6.0 (Left) and 9.0 (Right) in the display, the highest gain settings of the group.

Amp 1

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

30

MEM-1 MEM-2 MEM-3

individual amplifiers that you may have set separately.

If you can not adjust a group up or down, then it means the channel differences are being maintained and there is no where to go. You will need to adjust each amplifier individually or set each amplifier’s gain to a similar setting.

Here are four of the many possible examples.

Since the gain range is 12 dB (0.0 dB to 12.0 dB) for both channels,

when you try to increase or decrease the gain setting of this group you will only

have 3 dB of movement in either direction. (3.0 dB to 0.0 dB in the Left channel) and (9.0 dB to 12.0 dB in the Right channel) This will maintain all the channel and amplifier gain differences while allowing you to adjust the gain of all the amplifiers.

40 SXRC Remote Control