Fortinet 2 SXRC manual Through both chns, left chn and right, Mute on or mute off. Press the ESC

ESC HOME ENT

mute MENU - Here is where you can mute each channel(s) output on the amplifier for setup or testing purposes.

Use the UP and DOWN keys to scroll

through both chns, left chn and right

chn then press the ENT key to select. SX.1 ESC HOME ENT

Series does not offer Left or Right Channel option...Only Mute On or Mute Off for the entire amplifier since it is a Mono-Block design. Skip this step and move to next paragraph.

Use the UP or DOWN keys to select from

mute on or mute off. Press the ESC

key to save your setting and return to the

both chns, left chn and right chn

options menu. You can now select another mute option to adjust on this amplifier if desired.

Does not apply to SX.1 Series. Pressing the ESC key at this
point on a SX.1 Series amplifier exits the MUTE menu.
When you are done adjusting the mute on
this amplifier press the ESC key while in the
Both chns, left chn and right chn	ESC	HOME ENT

options menu to return to the AMP ADJ menu and choose another function to adjust.

There is also a LEFT and RIGHT indicator	AMP1				AMP2
	LOCK	LEFT	SYS	RIGHT	MUTE
in the ISIS display that will light up	GAIN EQ LPF HPF PHASE KOMP
	mute		offf
indicating which channel(s) (Left and/or
	MEM-1	MEM-2		MEM-3	MEM-4
Right) are currently being adjusted.
If you exit the MUTE menu with any	AMP1				AMP2
	LOCK	LEFT	SYS	RIGHT	MUTE
channel(s) muted (Mute On), the MUTE	GAIN EQ LPF HPF PHASE KOMP
	mute
indicator in the ISIS VFD will begin flashing
	MEM-1	MEM-2		MEM-3	MEM-4

to indicate this.

The MUTE indicator will stop flashing once you un-mute the channel(s) currently muted.

Operation

NOTE:

While you are in the MUTE menu the MUTE indicator on the ISIS display is lit. This indicates you are making adjustments in the MUTE menu.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

b oth chhnns

MEM-1 MEM-2 MEM-3 MEM-4

SXRC Remote Control 35