Fortinet 2 SXRC manual Indicates you are making adjustments in the HI-PASS menu

1119 hz

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

Operation

hi-passMENU - Here is where you adjust the selected group’s high pass crossover controls. All amplifiers in the group will be adjusted.

Use the UP and DOWN keys to scroll through frequency and slope and then

When you are done adjusting the high pass
crossover in this group press the ESC key
while in the frequency and slope options	ESC	HOME ENT
menu to return to the GROUP ADJ menu and
choose another function to adjust.

NOTE:

press the ENT key to select.

ESC HOME ENT

While you are in the HI-PASS menu the HPF indicator on the ISIS display is lit. This

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

FREQUENCY selects the crossover point and can be set at any 1/12th octave spaced frequency from 10 Hz to 16 kHz.

indicates you are making adjustments in the HI-PASS menu.

s lope

MEM-1 MEM-2 MEM-3 MEM-4

(10 Hz to 16132 Hz) SX.1 Series is 10 Hz to 159 Hz in 1 Hz steps.

Use the UP and DOWN keys to select your
frequency. Press the ESC key to save your
setting and return to the frequency and
slope options menu. You can now select	ESC HOME	ENT

The KICKER SXRC monitors and prevents any high pass crossover point from being set any closer than 1/3 octave from the low pass crossover point. If you cannot set the high pass crossover where you want then check the ISIS display and see if the HPF is lit and the LPF indicator is flashing. If it is then you need to go to the

another high pass crossover option to adjust

in this group if desired.

LO-PASS menu and raise the low pass crossover point.

MEM-1 MEM-2 MEM-3 MEM-4

SLOPE selects the roll-off of the crossover and can be set from oFF to 36 dB/OCT in 6 dB steps. SX.1 Series is OFF to 24 dB in 6 dB Steps.

Use the UP and DOWN keys to select your
high pass crossover slope. Press the ESC
key to save your setting and return to the
frequency and slope options menu. You	ESC	HOME ENT
can now select another high pass crossover
option to adjust in this group if desired.

This is done as a safety precaution to prevent a notch filter condition.

44 SXRC Remote Control