ON-SCREEN DISPLAY MENU TIMER MENU
Timer Menu
The Timer function for this TV uses a countdown timer system. It features On Timer, Off Timer and Auto Off.
1 Press the MENU button to display the menu.
Press the Ÿź cursor buttons to select the Timer option as shown on the right.
3LFWXUH
$XGLR
7LPHUŹ
)XQFWLRQ
6HWXS
6HOHFW6HW
2 Press the ENTER button to enter the Timer menu as
shown on the right.
The adjustment items are shown below:
Off Timer
Example To turn off after 1 hour and 25 minutes.
Press the Ÿź cursor buttons to select the Off option. Press number buttons to enter the specified amount of time (the maximum time is 23:59), input the hour, then input the minute, i.e.01:25 (shown on the right). Timer starts countdown after quitting the Timer menu. After 1 hour and 25 minutes, the TV will go into standby mode.
7LPHU ź |
2Q 2IIŹ $XWR2II2Q
6HOHFW Set | 5HWXUQ |
|
Note: As a precautionary measure, after setting Off Timer, if the power is turned off or power supply is cut off accidentally before the set time elapses, the TV will be in standby mode when you restart the TV.
On Timer
The setting of On Timer is similar to that of Off Timer. After On Timer is set, please turn off the TV by
pressing the button on the remote control unit to start the countdown, the power indicator on the front of the TV will be blinking. This is normal. The power is turned on when the set time has elapsed.
Notes: 1) If turning off the power using the POWER button on the front panel, On Timer will not work.
2)If the power is turned off by pressing the POWER button on the front panel before the set time elapses or the power supply is cut off accidentally, the TV will be in standby mode when you restart the TV.
3)As a precautionary measure, if there is no operation for 2 hours after the power is turned on by the On Timer function, the TV will go into standby mode automatically.
Auto Off
If Auto Off is set to On and there is no more broadcasting transmission (i.e. no signal is detected), the TV will go into standby mode automatically after 60 minutes. If Auto Off is set to Off, this function will be cancelled.
Notes: 1) Auto Off is only valid if no signal transmission is received from the antenna terminals.
2) If Within 60 minutes after no signal is detected, switching TV to any channel with signal will cancel the Auto Off function.
19