Hitachi C47-WD8000, C57-WD8000 instruction manual ON-SCREEN Display Menu Picture Menu

ON-SCREEN DISPLAY MENU PICTURE MENU

Picture Menu

Picture menu allows you to adjust various picture settings such as brightness, color, contrast and sharpness. You can also adjust the settings for color temperature, dynamic contrast, etc. Please follow the steps below.

1 Press the MENU button to display menu.

Press the Ÿź cursor buttons to select the Picture option as shown on the right.

3LFWXUHŹ 

$XGLR

7LPHU

)XQFWLRQ

6HWXS

6HOHFW6HW

2 Press the ENTER button to display the Picture menu as

shown on the right.

This is the first page in the Picture menu, providing 4 different picture modes (Dynamic, Natural, Theater, Favorite). Press the ŻŹ cursor buttons to select. We suggest that you try every item to obtain the desired picture effect.

To set the picture effect you desired, press the Ÿź cursor buttons to select the item to be adjusted, and then press the ŻŹ cursor buttons to adjust.

3LFWXUH			
	ź
	3LFWXUH0RGHŹ		)DYRULWH
	&RQWUDVW
	%ULJKWQHVV
	&RORU
	7LQW
6KDUSQHVV			
	&RORU7HPS&RRO
3$/&RPE)LOWHU2Q
	5HVHW
	6HOHFW	6HW	5HWXUQ

Notes

1Press the PICTURE button on the remote control unit, you can switch among the above four picture modes easily.

2Only when receiving NTSC signals or Y, PB/CB, PR/CR inputs or HDMI input, the Tint option can be adjusted.

3Only when receiving PAL system, the PAL Comb Filter option can be set to On or Off; when receiving other systems, the comb filter is automatically set.

4If the Reset option is selected and confirmed by pressing the ENTER button, the current setting on the menu will return to the factory setting.

5For AV1 AV5 inputs, different picture modes can be set individually.

16