Hitachi C57-WD8000, C47-WD8000 About the jacks and connections of rear panel, INPUT1

Page 65

CONNECTION WITH OTHER EQUIPMENT

About the jacks and connections of rear panel

1.Refer to the operation manual of your electronic equipment for additional information on connections.

2.If your device has only one audio output (mono sound), please connect it to the left channel jack (MONO/L).

3.Audio and video signal from the same source should be connected to the same group of terminals. Do not mix them.

4.Terminals Y/VIDEO,PB/CB,PR/CR in INPUT1 and INPUT2 are used to connect component outputs of HDTV STB, DVD, PDVD, etc. Y/VIDEO input terminal can also be used as the standard video terminal.

When you use Y/VIDEO, PB/CB, PR/CR terminals to connect component signals, press the RECALL button on the remote control unit to show the characters COMPONENT and AV1 or AV2 on the top right corner of the screen, which indicates that you are using component terminals to receive signals. However, when you use Y/VIDEO terminal instead of Y/VIDEO, PB/CB, PR/CR terminals to receive video signal, only the character AV1 or AV2 will appear on the top right corner of the screen.

The HDMI input on INPUT1 can be used to connect your external devices equipped with an HDMI output. When the HDMI on INPUT1 is connected, press the RECALL button on the remote control unit to show the characters HDMI or DVI and AV1 on the top right corner of the screen, which indicates that you are viewing the program through the HDMI on INPUT1.

Note: When the HDMI input on INPUT1 is used, please do not connect terminals (Y/VIDEO PB/CB PR/CR) on

INPUT1.

5.If your device has s-video signal output, please use s-video signal instead of the standard video signal.

If there are signals input from the same group of S-VIDEO and VIDEO terminals, the TV will receive signal from S-VIDEO and the characters S and AV3 or AV4 will appear on the top right corner of the screen by pressing the RECALL button, which indicates that you are using S-VIDEO terminal to receive signals.

6.

VIDEO

MONITOR OUT terminal outputs video signal receiving from RF, S-VIDEO or VIDEO terminal to

 

external equipment. When receiving component signals (Y PB/CB PR/CR) or HDMI signal, there is no output

 

from VIDEO

MONITOR OUT terminal.

7.

S-VIDEO

MONITOR OUT terminal outputs S-VIDEO signal receiving from S-VIDEIO inputs to external

 

equipment. When receiving signals from RF, VIDEO, Y, PB/CB, PR/CR terminals or HDMI, there is no output

 

from S-VIDEO

MONITOR OUT terminal.

8.FIXED/VARIABLE AUDIO MONITOR OUT terminals provide fixed or variable audio level output to external stereo system.

9.TV AS CENTER input jacks

These jacks are for stereo amplifiers with center signal output capability. This feature allows the TV speakers to be used as a center speaker.

10.IR BLASTER output jacks

Refer to page 42-52 for the use of AV NET function through IR BLASTER output jacks.

65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents C47-WD8000 C57-WD8000 Contents Safety Tips Avoid any kind of impact to your television Cleaning Precautions when movingMoisture Condensation Best spot for viewing Before Using this Rear Projection TVLocation Precautions when connecting the antenna Connect the power cord and the antennaPrecautions when using the batteries Precautions when using the remote control unitControl panel and side panel Functional PARTSRear panel Functional PartsOn the remote control unit To Turn on the Power Power on/offWhen the SET is AT Standby To Turn OFF the PowerInstructions for operating menu Getting StartedMenu Selecting the on-screen display languageEnter Easy PresetPicture Menu ON-SCREEN Display Menu Picture MenuSet to On, you can adjust and balance their individual When the Color Manager option shown on the right isIf the option of Reset was selected and press the Enter Top right to select the Color Manager option, then pressON-SCREEN Display Menu Audio Menu USP5510752 and 5736897. BBE and BBE symbol areAudio Menu Labs, IncTimer Menu ON-SCREEN Display Menu Timer MenuOff Timer On TimerFunction Menu ON-SCREEN Display Menu Function MenuSDQGHG Cursor buttons to set 3UHVHW ON-SCREEN Display Menu Setup MenuPress Cursor buttons to select the Program System to that program number Program Number selected AntennaTV/VIDEO AV53UHVHW  Select the Auto Mute option as shown on the right Remarks Auto LinkSpeaker Audio Out ON-SCREEN Diplay Menu Setup MenuText Language West EuropeMagic Focus To save the adjusted data and exit from adjustment modeMulti PIC Multi PictureSplit 5HVHW  6HOHFW 6HW 5HWXUQ P in P mode, you can press CH Surf CH Surf FunctionMode Strobe function is as shown below MMC Bridge Media FunctionTV/PHOTO RecallReturn Background , Slide Mode and Slide Music , please refer toRotate Explanations TV/ PhotoInformation display Status Bridge Media status indicator Display on screenConnection of the external audio/video equipment AV NETDevice External equipment AV NET Using the AV NET function  $XWR/LQN Press the button on the remote control unit of DVD player HDUQ UDQGWOHFWURQLF External audio/video equipment type code $PSOLIHU  $95HFHLYHU AV NET Teletext TV P.Size Aspect ModeSize 169 169Zoom Expanded 43Zoom1 43Zoom2169 169 169Zoom Auto P.SizeExpanded 43Zoom1 Expanded 43Zoom1 43Zoom2Other Functions Recall button TV/VIDEO buttonAV Direct Selector buttons CH I/II buttonHD Signal Through Mode Typical connection of video camera, VCR, etc Connection with Other EquipmentJacks and connections of side panel Connection with Other EQUIPMENT Typical connection of rear panel Jacks and connections of rear panelAbout Hdmi +0Hdmi Typical connection of79$6&175INPUT1 About the jacks and connections of rear panelAddenda Guide to simple problem solvingAccessories ADDENDA SpecificationsExemptions
Top Page Image Contents