Multi Picture, Split, Multi PIC | Hitachi C57-WD8000, C47-WD8000

MULTI PICTURE

The Multi Picture function of this projection TV provides two modes, Split and P in P. To use the Multi Picture function allows you to enjoy the programs easily and comfortably.

In normal picture mode, press the MULTI PIC. button to enter the Split or P in P mode.

Split

0XOWL3LFWXUH ź

Follow the steps on page 20 to enter the Function menu and

0XOWL3LFWXUH Ź

6SOLW

select the Multi Picture option, then enter the Multi Picture

&+6XUI

menu and select the Multi Picture option as shown on the

)UHH]H

6WLOO

right.

+36HOHFW

Press the

cursor buttons to set Multi Picture option to

5HVHW

Split mode, then exit from the menu.

6HOHFW 6HW

5HWXUQ

In normal picture mode, press the

MULTI PIC.

button to

enter the Split mode as shown below. Picture A and B will

show the programs of two channels respectively.

Once you have entered the Split mode, press the

button

A/B

to select any one of the two pictures. A red

symbol

will appear on top of the selected picture, indicating:

The TV speakers will output the sound from the selected

picture.

2 The monitor out terminals will output audio and video

signals from the selected picture.

The operations such as program selection, etc. are valid

for the selected picture. However, the program No.

selected in one picture cannot be the same as that in the

other one. Otherwise, the characters !Not Available will

appear.

Notes

1When the RECALL button is pressed, the picture A and B will display their respective program No.

instantly, and the red symbol will appear on the top of the selected picture momentarily.

2If the HP Select option in the Multi Picture menu is set to B, the headphone terminal of the side panel will always output the sound from picture B. If the HP Select option in the Multi Picture menu is set to A/B, the headphone terminal of the side panel will output the sound from the selected picture.

In the Split mode, you can press the SWAP button to switch between the two pictures, ie, to exchange the program sources of picture A and B.

If the Freeze option in the Multi Picture menu is set to Still, while in the normal TV mode, pressing the FREEZE button will enter the Split mode automatically. Picture A will display the current active program and picture B will display a freeze frame of the TV program captured at the moment you press the FREEZE button. MONITOR OUT terminals will output audio and video signals from picture A. Please refer to page 37 for information if the Freeze option in the Multi Picture menu is set to Strobe.

In the Split mode, the POSITION button does not work.

In the Split mode, press the MULTI PIC. or the RETURN button to exit.

In the Split mode, you may enter the Audio menu to make adjustment by pressing the MENU button. However, if you enter other menus such as Picture, it will exit from the Split mode.