Hitachi C47-WD8000, C57-WD8000 instruction manual Hduq

AV NET

8.The word “Succeeded” will be displayed on the lower left corner of the screen if the code is learnt. The frame of the item will be in yellow, indicating this item has been registered.

The word “Failed” will be displayed on the lower left corner of the screen if the TV fails to learn the code. Please make sure that your operations are correct and re-do according to the above steps.

The Not Available will be displayed on the lower left corner of the screen if the TV is lack of enough internal memory’s capacities. Please refer to the note (2) to clear the items which are seldom used in order to release the internal memory’s capacities.

$91(7					ź
'9'			
								
								
						0(18		
						
							(17(5	5(7851
								
								
					//			
				5(&$		/HDUQ
		6HOHFW					7HVW
	&+							
			5HVHW			5HWXUQ
 6XFFHHGHG								

9.In order to check the AV NET function works properly, a test must be taken on the item after the learning

succeeds. Press the ENTER button and the item will be displayed in yellow for about one second, the infrared signal will be output by the IR mouse. At this moment, the power of the DVD player should have corresponding action. If not, please check the connection and repeat the learning procedures.

10.If you want to learn the other keys of the DVD player. Please refer to the above steps and operate according to the hints on the screen.

11.You can control the DVD player by using the remote control unit of the TV after learning the related keys. Usage: Press the AV NET button to enter the AV NET mode. Press the Ÿź cursor buttons to select DVD2 and then refer to Using the AV NET function for more information.

Notes:

(1)The set can only learn and record remote codes of one of the external equipment. For example, you learn the codes of VCR2 after finishing learning the codes of DVD2, the set will record the codes of VCR2 only.

(2) Please select the learned items in order to clear their codes by pressing the	CH /	button to release the occupied internal
memory’s capacities. The outer frame of the reset items will return to white display.

(3)Due to the compatibilities of the equipment and the TV, sometimes the remote codes of some equipment cannot be learned by the TV. This is normal.



48