Hitachi C57-WD8000, C47-WD8000 instruction manual Connection with Other EQUIPMENT, Explanations

CONNECTION WITH OTHER EQUIPMENT

The typical connection of PC input
	PC cable	P
		C
		I
		N
		P
		U
		T
or		D-sub 15P
		I
Stereo plug		N
		U
		P
		T
		5
PC
		Side panel jacks

A U D I O

Explanations

 This TV supports PC with the specification of VESA 640 480@60Hz, VESA 800 600@60Hz or VESA 1024 768@60Hz.

Please connect the PC cable as shown above. Turn on the TV (and press the TV/VIDEO button to switch the TV to PC mode), follow by the PC. Some types of PC will be set to one of modes as mentioned above

automatically. If your PC cannot be set automatically, please set it manually. When disconnecting, please turn off the PC power, then turn off the TV power switch and take off the PC cable.

In some cases, the PC maybe cannot display with the TV together.

The PC input terminal does not supply the audio signal. Please connect the audio output jack of PC to audio input jacks of INPUT5.

Some PC cannot connect with this TV.

This TV is not a professional monitor, so you may find some differences on the display of the TV when

compared with the monitor.

This TV is not supplied with other equipment and cable as shown above.

The TV will exit PC mode automatically when entering the Timer, Function or Setup menu.  In PC mode, press the P.SIZE button to display as shown on the

right, you can press the ŸźŻŹ cursor buttons to adjust the display position up, down, left or right.

Note:
Avoid displaying still images on TV screen for a long time, otherwise,
the still images can cause permanently ingrained on the PRT.				9*$	6FUROO
PC INPUT pin layout
Pin	Name	Pin	Name	Pin	Name
1	R	6	GND	11	NC
2	G	7	GND	12	SDA DDC
3	B	8	GND	13	H SYNC
4	NC	9	NC	14	V SYNC
5	GND	10	GND	15	SCL DDC

61