One for All 6-Device Universal Remote owner manual Using Macros, To Operate Master Power Macro

Page 11

OFA 6L with Learning Owners Manual.fm Page 10 Thursday, February 17, 2005 1:10 PM

ONE FOR ALL 6L UNIVERSAL REMOTE CONTROL WITH LEARNING

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 5. The LED will blink twice.

3.Select an open macro key (e.g., M1) and press it once.

4.Press CBL/SAT once.

5.Enter the channel number: 5 2.

NOTE: If you have access to over 100 channels, enter 0 5 2. Moreover, if the original remote control requires you to press ENTER to change the channel, also press ENTER after the channel number (e.g., 0 5 2 ENTER).

NOTE: You can program up to 20 functions on the macro keys.

6.Press and hold SET until the LED blinks twice, then release SET.

Now when you press M1, you will instantly see cable channel 52 on your TV set.

PROGRAMMING A MASTER POWER MACRO

In its default state, the POWER key on the One For All 6L Universal Remote Control with Learning (URC-6820 B00) will individually power your home entertainment devices on or off. However, you can also program a Master Power Macro onto the POWER key that will sequentially turn on or off all the devices with a single key press.

To Program the Master Power Macro

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 5. The LED will blink twice.

3.Press the POWER key once.

4.For the first device you want in the power-on sequence, press its device key (e.g., TV) once.

5.For the second device you want in the power-on sequence, press its device key (e.g., CBL/SAT) once.

6.For the Third device you want in the power-on sequence, press its device key (e.g., AUD) once.

7.Repeat step 6 up to three more times to add the other desired devices to the power-on sequence (e.g., VCR, DVD, and PVR ).

8.To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET.

To Operate Master Power Macro

1.After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on (or off) your devices.

NOTE: When you press POWER for less than 2 seconds, a power command will only be sent to the currently-selected device. This allows you to still individually power devices on or off.

2.Devices will turn on (or off) according to your programmed sequence.

NOTE: The currently-selected device will always turn on or off first, followed by the remaining programmed sequence. After the master power sequence has been completed, the remote control will be set to control the first powered-on device.

NOTE: If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s).This action is normal.

PROGRAMMING A MACRO ON A DEVICE KEY

In its default state, when you press a device key (e.g., TV) on the One For All 6L Universal Remote Control with Learning (URC-6820

10 Using Macros

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Table of Contents Introduction ONE for ALL 6L Universal Remote Control with LearningFeatures and Functions IntroductionLower.Use Features and FunctionsKEY Charts Sound.UsePress REC to record a DVD or VCR program 009 orUse the Transport Device KEY Controls These Devices Device TableObtain two 2 new AAA alkaline Installing BatteriesOn the remote controls back, push Slide the battery cover outCBL/SAT Code Setting UP Your ComponentsSetting Up Your Components TV Code Brand Name VCR Code PVR CodeSET Searching for Your CodeProgramming Combo Device Control Programming Combo Device ControlEnter 9 9 0. The LED will blink twice Using MacrosPower Checking the CodesProgramming a Macro on a Device KEY Using MacrosTo Operate Master Power Macro To Operate the Device Key Macro Using Channel ScanUsing Channel Scan To Program the Device Key MacroProgramming Favorite Channel Scan Using LearningLearning Precautions Programming Favorite Channel ScanDeleting Functions from the Learning Keys RE-ASSIGNING Device KeysRe-assigning Device Keys Programming a Learning KEYUsing Keymover Using KeymoverUnlock Changing Volume LockAbout Upgrading TroubleshootingUpgrade Exclusions About UpgradingTroubleshooting FCC Compliance Limited WarrantyFCC Compliance URC-682001/05 Additional InformationAdditional Information One For All 33020 Índice de Materias Control with LearningIntroducción IntroducciónCaracterísticas Y Funciones Funciones DE LAS Teclas Características y FuncionesUse las Teclas de Use Para subir/ bajar el Volumen.UseONE for ALL 6L Universal Remote Control with Learning Tabla DE Dispositivos + y en el interior BateríasInstalación de las Baterías Nuevas y colóquelas en elProgramación de un Dispositivo Aparato Programación DE UN Dispositivo AparatoEncienda el aparato combinado TV/ DVD e inserte un DVD Búsqueda DE SU CódigoProgramación DE UN Aparato Combinado Programación de un Aparato CombinadoVerificación de los Códigos Verificación DE LOS CódigosPresione CBL/SAT una vez Introduzca el número del canal 5 Uso de los MacrosProgramación DE UN Macro DE Canal Favorito Introduzca 9 9 5. El LED parpadeará dos vecesDVD Uso del Macro de Encendido Maestro en la Tecla PowerPara Programar el Macro de Tecla de Dispositivo Presione TV, VCR, o CBL/SAT una vez Presione FAV una vez Control with Learning USO DE LA Exploración DE CanalesUso de la Exploración de Canales Borrar UN MacroPresione TV, VCR, DVD o CBL/SAT una vez USO DE LA Función AprendizajeUso de la Función Aprendizaje Borrar Funciones DE LAS Teclas DE Aprendizaje Reasignación DE LAS Teclas DE DispositivosReasignación de las Teclas de Dispositivos Programación DE UNA Tecla DE AprendizajeUso de la Función Keymover USO DE LA Función KeymoverCambio del Bloqueo del Volumen Cambio DEL Bloqueo DEL VolumenParámetros DE Fábrica Acerca DE LA ActualizaciónRestauración DE LOS Valores Fijados EN LA Fábrica Restauración de los Valores Fijados en la FábricaLocalización de Fallas Localización DE FallasDesbloquear el volumen Problema Traté el método deVolumen con el remoto Del Volumen en laLunes a Viernes de 9AM to 5PM ET Tiempo del Este Garantía LimitadaConformidad con la FCC Información Adicional Información Adicional
Top Page Image Contents