One for All 6-Device Universal Remote owner manual Troubleshooting

Page 18

OFA 6L with Learning Owners Manual.fm Page 17 Thursday, February 17, 2005 1:10 PM

SOLUTION:	Make sure the remote
	control is aimed at your
	home entertainment
	device and is not farther
	than 15 feet away.

PROBLEM:	The unit does not control
	home entertainment
	devices or commands are
	not working properly.
SOLUTION:	Try all listed codes for the
	device brands being set
	up. Make sure they can be
	operated with an infrared
	remote control.

PROBLEM:	TV/VCR Combo does not
	respond properly.
SOLUTION:	Use the VCR codes for your
	brand. Some combo units
	may require both a TV code
	and a VCR code for full
	operation.

PROBLEM:	Changing channels does
	not work properly.
SOLUTION:	If the original remote
	control required pressing
	ENTER to change channels,
	then press ENTER on the
	remote control after
	entering the channel
	number.

PROBLEM:	During learning, LED
	emits a long blink after
	pressing and holding key
	to be learned.

OWNER’S MANUAL

SOLUTION: Memory is full or a bad capture has occurred. Avoid high-ambient light sources, such as direct daylight and fluorescent bulbs. Try readjusting positions of remote controls before performing the procedure again.

PROBLEM: Tried Searching For Your Code method and still could not find a working code.

SOLUTION: Clear the device key as follows: Press and hold SET until the LED (red light) blinks twice, then release.Next enter 9 9 2. Then press the device key to be cleared twice.Now repeat the Searching for Your Code method on page 8.

PROBLEM: CH+ and CH- do not work for your RCA TV.

SOLUTION: Due to RCA design (1983- 1987), only the original remote control will operate these functions.

PROBLEM: No remote control of volume.

SOLUTION: See “Changing Volume Lock” on page 15 to lock/ unlock volume.

Troubleshooting 17

Image 18

Contents Page Table of Contents Introduction ONE for ALL 6L Universal Remote Control with LearningFeatures and Functions IntroductionSound.Use Features and FunctionsKEY Charts Lower.Use009 or Use the TransportPress REC to record a DVD or VCR program Device Table Device KEY Controls These DevicesSlide the battery cover out Installing BatteriesOn the remote controls back, push Obtain two 2 new AAA alkalineTV Code Brand Name VCR Code PVR Code Setting UP Your ComponentsSetting Up Your Components CBL/SAT CodeProgramming Combo Device Control Searching for Your CodeProgramming Combo Device Control SETChecking the Codes Using MacrosPower Enter 9 9 0. The LED will blink twiceUsing Macros To Operate Master Power MacroProgramming a Macro on a Device KEY To Program the Device Key Macro Using Channel ScanUsing Channel Scan To Operate the Device Key MacroProgramming Favorite Channel Scan Using LearningLearning Precautions Programming Favorite Channel ScanProgramming a Learning KEY RE-ASSIGNING Device KeysRe-assigning Device Keys Deleting Functions from the Learning KeysUsing Keymover Using KeymoverChanging Volume Lock UnlockAbout Upgrading TroubleshootingUpgrade Exclusions About UpgradingTroubleshooting Limited Warranty FCC ComplianceFCC Compliance One For All 330 Additional InformationAdditional Information URC-682001/05Control with Learning 20 Índice de MateriasIntroducción Características Y FuncionesIntroducción Características y Funciones Funciones DE LAS TeclasUse Para subir/ bajar el Volumen.Use Use las Teclas deONE for ALL 6L Universal Remote Control with Learning Tabla DE Dispositivos Nuevas y colóquelas en el BateríasInstalación de las Baterías + y en el interiorProgramación DE UN Dispositivo Aparato Programación de un Dispositivo AparatoProgramación de un Aparato Combinado Búsqueda DE SU CódigoProgramación DE UN Aparato Combinado Encienda el aparato combinado TV/ DVD e inserte un DVDVerificación DE LOS Códigos Verificación de los CódigosIntroduzca 9 9 5. El LED parpadeará dos veces Uso de los MacrosProgramación DE UN Macro DE Canal Favorito Presione CBL/SAT una vez Introduzca el número del canal 5Uso del Macro de Encendido Maestro en la Tecla Power Para Programar el Macro de Tecla de DispositivoDVD Borrar UN Macro Control with Learning USO DE LA Exploración DE CanalesUso de la Exploración de Canales Presione TV, VCR, o CBL/SAT una vez Presione FAV una vezUSO DE LA Función Aprendizaje Uso de la Función AprendizajePresione TV, VCR, DVD o CBL/SAT una vez Programación DE UNA Tecla DE Aprendizaje Reasignación DE LAS Teclas DE DispositivosReasignación de las Teclas de Dispositivos Borrar Funciones DE LAS Teclas DE AprendizajeUSO DE LA Función Keymover Uso de la Función KeymoverCambio DEL Bloqueo DEL Volumen Cambio del Bloqueo del VolumenRestauración de los Valores Fijados en la Fábrica Acerca DE LA ActualizaciónRestauración DE LOS Valores Fijados EN LA Fábrica Parámetros DE FábricaLocalización DE Fallas Localización de FallasDel Volumen en la Problema Traté el método deVolumen con el remoto Desbloquear el volumenGarantía Limitada Conformidad con la FCCLunes a Viernes de 9AM to 5PM ET Tiempo del Este Información Adicional Información Adicional