One for All 6-Device Universal Remote Using Channel Scan, To Program the Device Key Macro

Page 12

OFA 6L with Learning Owners Manual.fm Page 11 Thursday, February 17, 2005 1:10 PM

B00), the remote will switch to that selected device. However, you can also program a Macro onto the Device keys to allow for additional functionality. For example, if your devices are connected to a receiver unit, you can program a Device macro to switch the receiver's input to the selected device.

To Program the Device Key Macro

For example, let's assume that your DVD in connected to Input 3 of your receiver. You can program a macro that will switch the receiver's input to input 3 when you press and hold the DVD key.

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 5. The LED will blink twice.

3.Press the DVD key once.

4.Press the AUD key (to select the receiver)

5.Press digit 3 (for the input), and press DVD (to return control to the DVD key).

6.To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET.

NOTE: You can program up to 20 functions on the Device Key Macro. You can program a device Key Macro onto any device key.

To Operate the Device Key Macro

1.After programming, point the remote control at the receiver and press the DVD key for at least 2 seconds. This will switch the Receiver's input to input 3, to allow you to view the DVD.

NOTE: When you press the device key (e.g., DVD) for less than 2 seconds, the remote will only select the DVD mode but will not change the Input on the receiver. This allows you to still change modes while using the remote.

OWNER’S MANUAL

NOTE: After executing the Device Key Macro, the remote will return to the DVD mode, to allow the control of the DVD device.

CLEARING A MACRO

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 5. The LED will blink twice.

3.Select a macro key (e.g., M1, M2,

POWER or any device key) you want to clear and press it once.

4.Press and hold SET until the LED blinks twice, then release SET. The macro is now deleted but the keys (in the case of POWER and device keys), will retain their original function.

USING CHANNEL SCAN

In the TV, VCR, DVD and CBL/SAT modes, use the FAV key to start a 3-second scan of all favorite channels (if programmed, “Programming Favorite Channel Scan” on page 12) and/or all channels for the selected mode.

1.Press TV, VCR, DVD or CBL/SAT once.

2.Press FAV once.

•If Favorite Channel Scan has been set up, scanning of favorite channels will start and cycle through stored channels, then proceed to the next channel up and cycle through all channels on the selected device.

•If Favorite Channel Scan has not been set up, scanning will start with the current channel, then proceed to the next channel up and cycle through all channels on the selected device.

Using Channel Scan 11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Table of Contents ONE for ALL 6L Universal Remote Control with Learning Features and FunctionsIntroduction IntroductionFeatures and Functions KEY ChartsSound.Use Lower.Use009 or Use the TransportPress REC to record a DVD or VCR program Device Table Device KEY Controls These DevicesInstalling Batteries On the remote controls back, pushSlide the battery cover out Obtain two 2 new AAA alkalineSetting UP Your Components Setting Up Your ComponentsTV Code Brand Name VCR Code PVR Code CBL/SAT CodeSearching for Your Code Programming Combo Device ControlProgramming Combo Device Control SETUsing Macros PowerChecking the Codes Enter 9 9 0. The LED will blink twiceUsing Macros To Operate Master Power MacroProgramming a Macro on a Device KEY Using Channel Scan Using Channel ScanTo Program the Device Key Macro To Operate the Device Key MacroUsing Learning Learning PrecautionsProgramming Favorite Channel Scan Programming Favorite Channel ScanRE-ASSIGNING Device Keys Re-assigning Device KeysProgramming a Learning KEY Deleting Functions from the Learning KeysUsing Keymover Using KeymoverChanging Volume Lock UnlockTroubleshooting Upgrade ExclusionsAbout Upgrading About UpgradingTroubleshooting Limited Warranty FCC ComplianceFCC Compliance Additional Information Additional InformationOne For All 330 URC-682001/05Control with Learning 20 Índice de MateriasIntroducción Características Y FuncionesIntroducción Características y Funciones Funciones DE LAS TeclasUse Para subir/ bajar el Volumen.Use Use las Teclas deONE for ALL 6L Universal Remote Control with Learning Tabla DE Dispositivos Baterías Instalación de las BateríasNuevas y colóquelas en el + y en el interiorProgramación DE UN Dispositivo Aparato Programación de un Dispositivo AparatoBúsqueda DE SU Código Programación DE UN Aparato CombinadoProgramación de un Aparato Combinado Encienda el aparato combinado TV/ DVD e inserte un DVDVerificación DE LOS Códigos Verificación de los CódigosUso de los Macros Programación DE UN Macro DE Canal FavoritoIntroduzca 9 9 5. El LED parpadeará dos veces Presione CBL/SAT una vez Introduzca el número del canal 5Uso del Macro de Encendido Maestro en la Tecla Power Para Programar el Macro de Tecla de DispositivoDVD Control with Learning USO DE LA Exploración DE Canales Uso de la Exploración de CanalesBorrar UN Macro Presione TV, VCR, o CBL/SAT una vez Presione FAV una vezUSO DE LA Función Aprendizaje Uso de la Función AprendizajePresione TV, VCR, DVD o CBL/SAT una vez Reasignación DE LAS Teclas DE Dispositivos Reasignación de las Teclas de DispositivosProgramación DE UNA Tecla DE Aprendizaje Borrar Funciones DE LAS Teclas DE AprendizajeUSO DE LA Función Keymover Uso de la Función KeymoverCambio DEL Bloqueo DEL Volumen Cambio del Bloqueo del VolumenAcerca DE LA Actualización Restauración DE LOS Valores Fijados EN LA FábricaRestauración de los Valores Fijados en la Fábrica Parámetros DE FábricaLocalización DE Fallas Localización de FallasProblema Traté el método de Volumen con el remotoDel Volumen en la Desbloquear el volumenGarantía Limitada Conformidad con la FCCLunes a Viernes de 9AM to 5PM ET Tiempo del Este Información Adicional Información Adicional
Top Page Image Contents