Initial Setup
Position Adjustment
Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema or full.
Press the MENU button
π† To POSITION ADJUSTMENT √® To enter
π†√® To adjust the position
Press the MENU button to finish
Notes:
|
|
OPERATE OK RESET | MENU EXIT |
•To reset the adjustment to the center, press the OK button.
•When the arrow disappears, while you are adjusting the position, the position is at its maximum limit.
•If you select regular size and slim size with aspect or Multi Screen, position adjustment option is not seen.
•When you change the screen size, perform the position adjustment again.
•Position adjustment allows you to adjust the screen position vertically and horizontally when the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.
Power Indicator
Power indicator allows you to adjust the brightness of the power indicator
Press the MENU button
π† To POWER INDICATOR
è To adjust POWER INDICATOR LOW, HIGH or OFF
Notes :
•When OFF is selected :
The LED disappears if you have a TV signal.
The LED is lit as “LOW” when there is no TV signal.
INITIAL SETUP |
PREVIOUS
| NOISE MUTING | ON |
|
| FRONT PANEL LOCK | OFF |
|
| VIDEO INPUT LABEL |
|
|
| POSITION ADJUSTMENT |
|
|
| POWER INDICATOR | HIGH | |
| NEXT PAGE | (2/5) | |
|
|
|
|
| SELECT OPERATE | MENU EXIT | |
•When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off.
•If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
49