Button Functions
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP button
0 15 30 45 60 75 90 105 120 135 150 165 180 
Sleep Timer Message
60 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT!!
PUSH SLEEP TIMER BUTTON
TO EXTEND
You then have 60 seconds to press the SLEEP button to
delay the shut off for another 15 minutes.
ML/MTS
MTS technology allows several audio signals to be broadcast in analog at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP).
Press the ML/MTS button
By every press of the ML/MTS button, you change the mode
Notes:
| MTS |
ON AIR | STEREO |
ON AIR | SAP |
| MONO |
•When you are receiving a digital broadcast, if there are other languages, you can change the language by pressing the ML/MTS button.
•Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only.
•Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
•Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
•MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described on page 60.
•ML/MTS will not work when you are using the
•You can also change the mode by pressing the π† buttons.
63