EverFocus EDSR-1600, EDSR-900 instruction manual Record Setting Menu

MENU

6.9 RECORD SETTING MENU

RECORD SETTING MENU

NORMAL RECORD

SPEED	: 50 IPS
QUALITY	: STANDARD
DISK FULL	: REWRITE

ALARM RECORD

OPERATION ON

SPEED: 50 IPS

QUALITY : STANDARD

PRE-ALARM RECORD

OPERATION ON

PREMANENT RECORD

OPERATION	: ON
SPEED	: 0,01 IPS

In NORMAL RECORDING MENU we define

(1)NORMAL RECORD:

SPEED : Choose the normal recording speed. Maximum 60 (NTSC) / 50 (PAL).

QUALITY: Define the video picture’s quality by selecting a compression rate. There are six quality levels for recording

LOWER	: 15 KB
LOW	: 19 KB
BASIC	: 23 KB
STANDARD : 27 KB
HIGH	: 31 KB
SUPERIOR	: 35 KB

DISK FULL: Set REWRITE or STOP when HDD is full.

(2)ALARM RECORD (for Alarm In and Motion detection):

OP (Operation): Select ON to activate or OFF to deactivate alarm recording.

SPEED : Choose the alarm and motion recording speed. Maximum 60 (NTSC) / 50 (PAL).

QUALITY: Define the video picture’s quality by selecting a compression rate.

NOTE: The recording rates are for the total system. The single camera recording rate is: Camera recording rate = System recording rate / Number of connected cameras Example: Recording rate 50 IPS, 6 connected cameras: ~ 8,3 IPS / camera

NOTE: For alarm recording, see also remarks in (4) PERMANENT RECORDING.

Turn the JOG dial clockwise or counter-clockwise to select the options.

Press ENTER key to confirm the option and move to next column.

ENTER

Press MENU key to return to Main Menu, press again to leave Set up Menu.

MENU

20