MENU
PTZ-CONTROL WITH WEB BROWSER (from FW 1.09 only)
If the checkbox "PTZ CONTROL" is activated in the Web’s applet of the EDSR600/900/1600, the screen shows the telemetry control functions.
Please consider the time delay in video network transmission at manual PTZ control! PTZ network control is not recommended for ISDN or analogue transmission lines due to slow video transmission rate and long video delay.
Control buttons:
1. PTZ CAMERA: | Camera selection |
2.REACTION METHOD: Reaction method of PTZ keys
| Continuous - commands send permanent if | |
| button is pressed | |
| Step x 10 - | 10 command / key press |
| Step x 5 - 5 command / key press | |
| Step x 1 - 1 command / key press | |
3. Arrow keys: | Control of pan / tilt | |
4. Z+ / | Zoom function Z+: tele, | |
5. Focus: | manual focus NEAR or FAR | |
6. IRIS: | manual iris control INC: open iris | |
|
| DEC: close iris |
7. PRESET: | Preset selection | |
| SET: Storing of current PTZ position | |
| CLR: Deleting of selected preset | |
| GO: calls the selected preset position | |
8. SEQ.*: | Preset tour |
|
| 1 ~ 60 sec.: Dwell period between presets in | |
|
| tour |
| RUN: | Start preset tour |
| STOP: | Stop preset tour |
9.AUTO PAN**: Automatic Pan – function
RUN: AUTO PAN Start
STOP: AUTO PAN Stop
*function not supported for ED2250 with PELCO - P Protocol
**function not supported for ED2250
51