MENU
6.16 PTZ SETTING MENU
PTZ SETTING MENU
PTZ ENABLE: OFF
PTZ Port: RS485
PROTOCOL: PELCO- D
BAUD RATE: 9600
PTZ ADDRESS: |
|
CH1: 001 | CH9: 009 |
CH2: 002 | CH10: 010 |
CH3: 003 | CH11: 011 |
CH4: 004 | CH12: 012 |
CH5: 005 | CH13: 013 |
CH6: 006 | CH14: 014 |
CH7: 007 | CH15: 015 |
CH8: 008 | CH16: 016 |
The EDSR600/900/1600 Recorder from FW 1.09 provides telemetry control over network. Local device telemetry control at the EDSR recorder is not possible. Telemetry bus may be connected to
In the PTZ SETTING MENU, we define
PTZ ENABLE: ON activates telemetry function / OFF disable telemetry function.
PTZ - Port: Selection of active telemetry port, RS232 or RS485.
ATTENTION: If the EDSR is remote controlled by
PROTOCOL: Supported protocols: PELCO- D,
BAUD RATE: There are 6 telemetry transmission rates, selectable 1200, 2400, 4800, 9600, 19200, 38400 baud rate.
Turn the JOG dial clockwise or
Press ENTER key to confirm the option and move to next column.
ENTER
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
29