EverFocus EDSR-900, EDSR-1600 instruction manual Call / Matrix Monitors, Sequence

MONITOR VIEWS / OPERATION

10.2. CALL / MATRIX MONITORS

CALL

Press CALL to change settings for CALL / MATRIX monitors. The Main monitor shows following dialogue:

MATRIX NORMAL STATE SETTING MENU

PRESS CALL TO SET CALL MONITOR

PRESS 1-4 TO SELECT MATRIX

Select the monitor by pressing CALL or the numeric keys 1~4.

The Main monitor shows following dialogue (example with monitor 1):

SETTING MATRIX 1…

SEQUENCE

OSDON

PRESS 1 – 16 TO SELECT SPOT CAMERA

PRESS SEQ TO SEQUENCE

PRESS DISPLAY TO TURN OSD ON/OFF

PRESS MENU TO EXIT

The current status of the selected monitor is shown in the second and third column

(Sequence / Spot, OSD ON/OFF).

Press sequence to activate the standard sequence for this monitor (setup for this sequence in menu MATRIX, page 27)

SEQUENCE

The numeric keys switch to full screen mode with the selected camera.

Press MENU to jump back to monitor selection menu.

MENU

NOTE: In menu MATRIX defined events for motion and alarm have higher priority and will override the manual settings. After end of any event the monitor switches back to the manual settings.

43