Back Panel Connections
MONITOR
3MUX MAIN MONITOR: Video input BNC connector, connected to multiplexer main monitor output.
4MONITOR : Video output BNC connector connected to main monitor.
|
| ( Internal circuit ) |
|
|
| SW3 |
|
MAIN |
|
|
|
MONITOR | INTERNAL | A | MONITOR OUT |
| VIDEO |
|
|
When the machine is in Menu, Search or Copy mode, the internal Video is switched to Monitor Out, so that the user
can view full screen OSD. In other modes, the Video from multiplexer main monitor will be
VIDEO IN /Output
5
6
VIDEO IN : The BNC connectors of video input enables the system to receive the signals from each camera through the 75 ohm coaxial cables.
VIDEO OUT(1~2) : Connect the other devices with four cameras to the other devices .
VIDEO LOPPING : The
Alarm Input/ Output
7
The Alarm Input can be selected as Normal Open or Normal Close input in the setup menu. When an alarm occurs, alarm recording will automatically start.
shorted to the terminal of ALM
between ALM
6