EverFocus EDSR100H instruction manual Buzzer Setting Menu, Record

Page 31

6.6 BUZZER SETTING MENU

BUZZER SETTING MENU

BUZZER	: ENABLE
ALARM – IN	: ON
RECORD -IN	: ON
DISK FULL	: ON
VIDEO LOSS	: ON
TIMER	: ON

In BUZZER SETTING MENU, we SET the buzzer ON/OFF under the following conditions:

(1) BUZZER :

ENABLE: Turns the buzzer on.

DISABLE: Turns the buzzer off.

User can press Enter button to enable/disable in Record/Playback mode .

(2) ALARM – IN :

ON, the buzzer will sound when the alarm occurs.

(3) RECORD – IN:

ON, the buzzer will sound when Record -IN signal is applied on the Record -IN terminal.

(4) DISK FULL :

ON, the buzzer will sound when disk is near full 99.7%

(5) VIDEO LOSS :

ON, the buzzer will sound when the video loses.

(6) TIMER :

ON, the buzzer will sound when timer record occurs.

Left/Right Button: Press

Up/Down Button: Press

or or

to move the cursor to the left or right to change the value.

Image 31

Contents EDSR100H Safety Precautions Safety Warning AC100V~240V Power Cords Important Safeguards Important SafeguardsTable of Contents Product Overview Product Overview and FeaturesSpecifications Front Panel Keypads Front Panel KeypadsLeft/Right Button Press Up/Down Button Press Jog and Shuttle Dial Display Press this key to switch ON/OFFAudio PowerBack Panel Connections Back Panel ConnectionsMonitor Alarm Input/ OutputVideo in /Output RS232 System Connection System ConnectionOne Camera Connection Multiplexer Main Monitor Output Multiplexer ConnectionMain Monitor Multiplexer VCR Out Multiplexer VCRQuad Main Monitor Out Quad Connection. Quad with VCR in VCR out connectorMain Monitor Quad VCR Out Quad VCRMain Monitor Quad Video Out to Video Recorder Quad connection. Quad without VCR in VCR out connectorInstallation Menu Menu Language English CLOCK/ Language Setting MenuVersion 1.0 2003/05/26 CLOCK/LANGUAGE Setting Menu , we SET Date 2003/04/24 TUE TimeEND on JAN 1ST MON Daylight Setting MenuFrom 0000 to Daylight Setting Menu , we define From 0000 toStandard OFF Timer Setting MenuTimer Setting Menu Week Start Stop Speed Quality SET SUN Standard OFF SUNSET SpeedNormal Recording MENU, we define Normal Record Setting MenuDisk Full MultiplexerRecording Quality Alarm Record Setting MenuAlarm Record Setting Menu Alarm Operation Recording Speed PRE-ALARM Operation Recording SpeedPRE-ALARM Operation Alarm Reset TypePRE Alarm Time 15Figure 1 Normally open connection use pin # 13 and # Alarm outNormally Closed Connection use pin # 13 and # Circuit AlarmAlarm in and alarm reset AlarmRecord Buzzer Setting MenuTime Stamp Archive Setting MenuArchive Setting Menu Picture Size 720x576Baud Rate RS232/RS485 Setting MenuParity None Data BIT Stop BIT OFF System Setting MenuSystem Setting Menu Play with Audio Password Enable PasswordPress Yes to Renew HDD and Press Enter key to Exit Press no to renew HDD and Press Enter key to ExitCF Renew REC Stop RecordingInstant Recording Press Record key to start the recording immediatelyMenu Alarm RecordingPress Menu key and turn the jog dial to select the Alarm Recording Setting Menu Recording OperationREV.PLAY Playing BackNormal Playback PlayPause Slow Forward/Reverse PlaybackFrame/Field advance Forward/Reverse Segment Search Playback Search PlaybackSearch Alarm Search Playback Date/Time Search Playback Press the Pause key to freeze the picture CopyStill Image Copy Press the Play key to start playing backPress Copy key and then the copy menu appears Copy to Movie FileCopy Copy to Movie File Pause Search Stop Pin assignment of the 9-pin D-SUB connector Interface SpecificationsSUB 9-pin connector specifications Transmission settingRemote Control Protocol Receiver ID Digital Video Recorder Page Remote Controller Remote ControllerAppendix-A APPENDIX- A/Time Lapse Mode Recording TimeWhen Recording with 160-GB HDD Appendix-B APPENDIX-B/SECURITY Lock SettingLock Beijing Office Head OfficeUSA Office Japan Office