EverFocus EDSR100H instruction manual Safety Precautions

Page 2

Safety Precautions

Safety Precautions

?Refer all work related to the installation of this product to qualified service personnel or system installers.

?Do not block the ventilation opening or slots on the cover.

?Do not drop metallic parts through slots.This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service.

?Do not attempt to disassemble the appliance.To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance. Handle the appliance with care. Do not strike or shake, as this may damage the appliance.

?Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do take immediate action if the appliance becomes wet. Turn the power off and refer servicing to qualified service personnel. Moisture may damage the appliance and also cause electric shock.

?Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove,use a mild detergent and wipe gently.

?Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.

?Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within 0o C ~ +40o C and a humidity below 90%. The input power source for this appliance is AC100~240V.

Image 2
Contents EDSR100H Safety Precautions Safety Warning AC100V~240V Power Cords Important Safeguards Important SafeguardsTable of Contents Product Overview and Features Product OverviewSpecifications Left/Right Button Press Up/Down Button Press Front Panel KeypadsFront Panel Keypads Display Press this key to switch ON/OFF Jog and Shuttle DialBack Panel Connections PowerBack Panel Connections AudioVideo in /Output Alarm Input/ OutputMonitor RS232 One Camera Connection System ConnectionSystem Connection Multiplexer VCR Multiplexer ConnectionMain Monitor Multiplexer VCR Out Multiplexer Main Monitor OutputQuad VCR Quad Connection. Quad with VCR in VCR out connectorMain Monitor Quad VCR Out Quad Main Monitor OutQuad connection. Quad without VCR in VCR out connector Main Monitor Quad Video Out to Video RecorderInstallation Menu Date 2003/04/24 TUE Time CLOCK/ Language Setting MenuVersion 1.0 2003/05/26 CLOCK/LANGUAGE Setting Menu , we SET Menu Language EnglishFrom 0000 to Daylight Setting MenuFrom 0000 to Daylight Setting Menu , we define END on JAN 1ST MONStandard OFF SUN Timer Setting MenuTimer Setting Menu Week Start Stop Speed Quality SET SUN Standard OFFSpeed SETNormal Record Setting Menu Normal Recording MENU, we defineMultiplexer Disk FullPRE-ALARM Operation Recording Speed Alarm Record Setting MenuAlarm Record Setting Menu Alarm Operation Recording Speed Recording QualityPRE Alarm Time Alarm Reset TypePRE-ALARM Operation 15Figure 1 Normally Closed Connection use pin # 13 and # Alarm outNormally open connection use pin # 13 and # Alarm AlarmAlarm in and alarm reset CircuitBuzzer Setting Menu Record720x576 Archive Setting MenuArchive Setting Menu Picture Size Time StampParity None Data BIT Stop BIT RS232/RS485 Setting MenuBaud Rate Password System Setting MenuSystem Setting Menu Play with Audio Password Enable OFFPress no to renew HDD and Press Enter key to Exit Press Yes to Renew HDD and Press Enter key to ExitCF Renew Press Record key to start the recording immediately RecordingInstant Recording REC StopRecording Setting Menu Recording Operation Alarm RecordingPress Menu key and turn the jog dial to select the Alarm MenuPlay Playing BackNormal Playback REV.PLAYFrame/Field advance Forward/Reverse Slow Forward/Reverse PlaybackPause Search Search PlaybackSegment Search Playback Alarm Search Playback Date/Time Search Playback Press the Play key to start playing back CopyStill Image Copy Press the Pause key to freeze the pictureCopy Copy to Movie File Copy to Movie FilePress Copy key and then the copy menu appears Pause Search Stop Transmission setting Interface SpecificationsSUB 9-pin connector specifications Pin assignment of the 9-pin D-SUB connectorRemote Control Protocol Receiver ID Digital Video Recorder Page Remote Controller Remote ControllerAPPENDIX- A/Time Lapse Mode Recording Time Appendix-AWhen Recording with 160-GB HDD Lock APPENDIX-B/SECURITY Lock SettingAppendix-B Japan Office Head OfficeUSA Office Beijing Office