| |||||||
|
|
|
|
|
|
|
|
6.4.3 System Setting | Picture of the System Setting Menu |
|
|
|
|
| |
|
|
|
|
| |||
|
|
|
|
| |||
|
| See screen shot at right: |
|
|
|
|
|
|
|
|
|
|
|
|
|
General
DATE and TIME are used to modify the current system date and time; after the modification reserve the change by selecting SAVETIME; in
HDDFULL if selecting OVERWRITE system covers the previous recording files; RECORDLEN can set the length of each recording file(15 mins, 30 mins, 60 mins)Note: 15 minutes is suggested. COMMCTRL can Activate the communication control protocols. The existing comm control protocols are:
MODEM -
AB- | matrix control |
DH | Keyboard control |
NONE | upgrading system through serial port |
Note: System time shall NOT be changed freely; otherwise it would cause the malfunction of recording search.
DATE
FORMAT
TIME 12:22:01
FORMAT AM/PM SAVETIME INTERVAL 005 SEC HDDFULL OVERWRITE RECORDLEN 15 MIN REMOTEADDR 108
COMMCTRL NONE SAVE CANCEL
Schedule
Select the corresponding channel in | CH | . In | WEEK | the letter of each |
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
day is chosen, when the letter displays are highlighted. | SLOT1 | and | SLOT2 |
|
| |||||||||||||
|
| |||||||||||||||||
express the timed recording period of the current channel. |
|
| should |
| ||||||||||||||
SLOT2 |
| |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||
be after the ending time of | SLOT1 | . The setting range is | ||||||||||||||||
| ON means the time setting is on. OFF means the time setting is |
| ||||||||||||||||
STATE | ||||||||||||||||||
OFF. |
| |||||||||||||||||
|
|
|
|
|
|
|
| |||||||||||
Note: 1: If you need to record all day long, set | SLOT1 | as |
| |||||||||||||||
& state is on; set |
| as off. 2: When setting time in |
| , |
| |||||||||||||
SLOT2 | WEEK |
| ||||||||||||||||
several days can be set at the same time. |
| |||||||||||||||||
When Reviewing a certain channel’s timing, only the current day will |
| |||||||||||||||||
be highlighted. |
| |||||||||||||||||
33 | ! |