|
|
1 System Setting of the Terminal
The system’s operation can also be controlled through the RS232 port. The specific operation is as follows: First, copy “Terminal” and new DVR system software to the computer. Connect the computer with the DVR via the RS232 port. Run “Terminal” program and create the connection between the computer and the DVR.
The settings information for the connection is: Baud rate— 115200bps
Data bit— 8 bits
Stop bit— 1 stop
Check — no parity
Control on data flow— no
You can log in by username admin (default user with administrator ) for the serial port login.
Login steps:
Press any key to enter the login interface which displays the following:
Username: admin
Input the name; press the “enter” key. Then, input the password as follows:
Password: admin
If the username and password are correct, the system will allow entry via the serial port. The detailed functions are the same as the menu setting.
68 | ! |