|
|
6.4.4 Admin setting
Password
Menu of Admin setting is pictured at Right:
Select GUEST and MANAGE. Press or the number key to change the password, then confirm the change by inputting the password again. Press ESC to go back to the sub menu. Only ADMIN level user can change the password.
SAVE CANCEL
File delete
Others
Used to clear the data in the HDD. Be careful with this item.
Before you delete the data, you have to input the manage password.
During Alarm tip on, when there is alarm input from outside,
the alarm information window will pop up. If Shutdown pwd is on, you need to input the right manage level password before turning off the DVR; if it is off, 4 seconds after pressing on the power button the DVR will turn off. Output x o point and Output y point are set for the starting point of the window on the screen, and Playback height is to set the window height during playback. The user can set the starting point of the monitor screen and the size of the monitor screen and the playback
screen.
DATA DEL
PASSWORD: _______
ALARM TIP |
|
| ON |
SHUTDOWN PWD |
| OFF | |
OUTPUT X/Y POINT |
| 000/000 | |
PLAYBACK HEIGHT |
| 480 | |
AUDIO MODE |
| PCM 8KHZ | |
TITLE COLOR |
| WHITE | |
MONITOR OSD |
| ON | |
MAINTENACE | WEEK | S M T W T F S | |
MAINTENACE | TIME | 12:00 AM | |
SAVE CANCEL
Default | Press to get the setting and press ENTER to confirm. After the | |
default setting is selected, system will restore the original Factory | ||
| ||
| Default settings. |
LOAD DEFAULT CONFIGURES?
YES NO
36 | ! |