Watch TV
Switch TV on or off
Switch the TV on
∙Press the power switch at the base of the TV to the ON position.
∙If the TV is in standby, press 
on the remote control.
Note: There is a short delay before the TV responds.
Tip: If you cannot find your remote control and want to switch on the TV from standby, press CH +/- on the front of the TV.
Though your TV consumes very little energy in standby, it does use some energy. If you are not going to use the TV for an extended period of time, switch it off to cut off the power.
Switch TV to standby
Press 
on the remote control. The remote control sensor on the TV switches to red.
Switch off the TV
Press the power switch at the base of the TV to the OFF position.
The TV no longer consumes energy.
Automatic switch off
This TV is designed with energy efficiency settings. If there is no user interaction (such as pressing a remote control button or a control on the front panel) for four hours, the TV will automatically switch to standby.
EN 14
To disable automatic switch off,
While you watch TV, press the green button on the remote control. Select [Auto switch
off] and press OK. An on screen message confirms that automatic switch off is disabled.
Adjust TV volume
Increase or decrease the TV volume
∙Press +/- on the remote control.
∙Press 
+/- on the front of the TV.
Mute or unmute the TV volume
∙Press 
to mute the TV, or
∙Press 
again to restore the volume.
Adjust headphone volume
1.Press 
> [TV settings] > [Sound].
2.Select [Headphones volume], then press OK.