Install analogue channels
You can search and store analogue TV channels manually.
Step 1: Select your system
Note: Skip this step if your system settings are correct.
1.While you watch TV, press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation].
3.Select [Analogue: Manual installation] > [System], then press OK.
4.Select the system for your country or region, then press OK.
Step 2: Search and store new TV channels
1.In the [Analogue: Manual installation] menu, select [Find channel], then press OK.
2.Select one of the following options:
∙Press the Navigation buttons or Numeric buttons to manually enter the channel frequency.
∙Select [Search] then press OK to search for the next channel automatically.
3.When the correct channel frequency is entered, select [Done], then press OK.
4.Select [Store as new channel], then press OK to store the new TV channel.
Install digital and satellite channels
Install digital channels
To improve TV reception, reposition the antenna. You need to know the correct frequency to tune. For best results, contact the service provider or get a professional installer.
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation].
3.Select [Digital: Reception test] > [Search], then press OK.
4.Press the Numeric buttons to enter the
channel frequency.
5.Select [Search], then press OK.
6.When the correct channel is located, select [Store], then press OK.
7.Press 
to exit.
Notes |
| |
| ||
∙ | If the reception is poor, reposition your | English |
∙ | If you receive the channel with | |
| antenna and repeat the procedure. |
|
| select [Automatic] in [Symbol rate |
|
| mode] unless your cable provider |
|
| supplies you with a specific symbol rate |
|
| value. |
|
Install satellite channels
Note: Available on certain models only. [Search for satellite] is only available if the TV supports
If your satellite receiver is connected to the SAT connector, you can receive satellite channels.
1. While you watch TV, press 
.
2.Select [Setup] > [Search for satellite] > [Reinstall channels].
3.Follow the onscreen instructions to complete the installation.
4.Once complete, select [Finish], and then press OK.
View satellite channels
To watch satellite channels, press 
> [Watch satellite].
Fine-tune channels
If the reception of an analogue TV channel is poor,
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation].
3.Select [Analogue: Manual installation] > [Fine tune], and then press OK.
4. Press 
or 
to
5.When you have selected the correct channel frequency, select [Done], and then press OK.
6.Select one of the following options, then press OK.
∙ [Store current channel]: Store the
channel as the current channel number.
∙ [Store as new channel]: Store the channel as a new channel number.
EN 39