4 Set up your TV
Settings assistant
Use the settings assistant to guide you through the picture and sound settings.
1.While you watch TV, press 
.
2.Select [Setup] > [Quick picture and
sound settings], then press OK.
3.Select [Start], then press OK.
4.Follow the onscreen instructions to choose your preferred settings.
Picture and sound
More picture settings
1.Press 
.
2.Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
∙[Smart picture]: Access predefined smart picture settings.
∙[Reset]: Reset to default settings.
∙[Contrast]: Adjust the intensity of the bright areas, keeping dark areas unchanged.
∙[Brightness]: Adjust the intensity and details of the dark areas.
∙[Colour]: Adjust colour saturation.
∙[Hue]: Compensate colour variations in NTSC encoded transmissions.
∙[Sharpness]: Adjust sharpness in the image.
∙[Noise reduction]: Filter and reduce noise in the image.
∙[Tint]: Adjust the colour balance in the image.
∙[Custom tint]: Customise tint setting.
∙[Pixel Plus HD] / [Pixel Precise HD]: Access advanced settings, including [HD Natural Motion], [100 Hz Clear LCD], [Advanced sharpness], [Dynamic contrast], [Dynamic backlight], [MPEG artefact reduction], [Colour enhancement], [Gamma].
EN 36
∙[PC mode]: Allow picture settings to be changed when a PC is connected to the
TV through HDMI.
If enabled, you can select [Picture format] > [Unscaled] which provides maximum detail for display of PC content.
∙[Light sensor]: Adjust settings dynamically to match lighting conditions.
∙[Picture format]: Change the picture format.
∙[Screen edges]: Change the picture size.
∙[Picture shift]: Adjust the position of the picture. You cannot select this
setting if the selected picture format is Auto zoom or Wide screen.
More sound settings
1.Press 
.
2.Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:
∙[Smart sound]: Access predefined smart sound settings.
∙[Reset]: Reset to factory default settings.
∙[Bass]: Adjust the bass level.
∙[Treble]: Adjust the treble level.
∙[Surround]: Enable spatial sound.
∙[Headphones volume]: Adjust headphone volume.
∙[Auto volume leveling]: Automatically reduce sudden volume changes, for example when switching channels.