Philips 37PFL66X6T, 55PFL66X6T, 40PFL66X6H Retain picture quality, Maximize video display, Device

Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are

selected, access the adjust menu to switch the TV audio.

1.While you watch TV, press ADJUST.

2.Select [Speakers], then press OK.

3.Select one of the following, then press OK:

∙ [TV]: On by default.

Stream TV audio through the TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected

device.

∙ [Amplifier]: Stream audio through the connected HDMI-CEC device. If system audio mode is not enabled on the

device, audio continues to stream from the TV speakers. If [EasyLink autostart] was enabled, the TV prompts the connected device to switch to system audio mode.

Retain picture quality

If your TV picture quality is affected by the picture-processing features of other devices, switch on Pixel Plus Link.

To switch on Pixel Plus Link

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink].

3.Select [Pixel Plus link] > [On], then press OK.

Maximize video display
Some subtitles can create a separate subtitle	English
bar under the video, which limits the video
display area. After you switch on auto
subtitle shift, the subtitles display over the
video image, which maximizes the video
display area.

Switch on auto subtitle shift

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [Auto subtitle shift].

3. Select [On], then press OK to activate.

Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie

expand 16:9].

Hear another device at TV standby

You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby.

1.Press ADJUST to receive audio from the connected Philips EasyLink device.

If available, audio only mode is enabled.

2.Accept the prompt on the TV to turn off the TV screen.

3.Control the audio playback with the TV remote control.

EN 35