Set TV wallpaper
You can load another picture as the wallpaper.
Note: Loading a new picture overrides the existing picture.
1.Connect the USB storage device to the TV.
2.Press 
.
3.Select [Browse USB], then press OK.
4.Select a picture, then press 
OPTIONS.
5.Select [Set as Scenea], then press OK.
6.Select [Yes], then press OK.
7.Press any button to exit Scenea.
Set Scenea lounge light
When the TV is in standby, you can switch on Ambilight and create a lounge light effect with your wallpaper. Ambilight is available on certain models only.
When the TV is in standby, press AMBILIGHT on the front of the TV.
Note: It can take more than 5 seconds for the lounge light to switch on.
To select another colour for the lounge light, see Use your TV > Ambilight > Setup (Page
19).
Set universal access
Switch on
Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired.
To enable these features, turn on universal access in the preference menu.
1.Press 
.
2.Select [Setup] > [TV settings] >
[Preferences].
3.Select [Universal access] > [On], then press OK.
EN 32
Hearing impaired
Tip: To verify whether a hearing impaired
audio language is available, press 
OPTIONS and select [Audio language].
Languages with an ear icon support hearing impaired audio.
To switch on hearing impaired audio and subtitles
1.While you watch TV, press 
OPTIONS.
2.Press one of the following buttons to select an option:
∙ Red: Switch hearing impaired on or off.
∙ Green: Switch on hearing impaired audio and subtitles.
3.Press 
to exit.
Visually impaired
Tip: To verify whether visually impaired
audio is available, press 
OPTIONS and select [Audio language]. Languages with an eye icon support visually impaired audio.
To switch on visually impaired audio (if available)
1.While you watch TV, press 
OPTIONS.
2.Press the green button to select [Visually impaired].
3.Press one of the following buttons to select an option:
∙Red - [Off]: Turn off visually impaired audio.
∙Yellow - [Headphones]: Hear visually impaired audio from headphones only. (if applicable)
∙Green - [Speakers]: Hear visually impaired audio from speakers only.
∙Blue - [Speakers + headphones]: Hear visually impaired audio from speakers and headphones.
4. Press 
to exit.
Note: If the EasyLink remote control is
enabled, you cannot select the green or yellow buttons. To disable, seeUse more of
your TV > Use EasyLink > Switch on. (Page 34)