Reinstall channels
ATTENTION: This feature is intended for dealers and service personnel.
You can copy channel lists from one Philips TV to another through a USB storage device. You do not need to search for channels or install them again on the second TV. The channel list file is small enough to fit on any USB storage device.
What you need
The two Philips TVs must have:
∙the same country setting,
∙the same year range,
∙the same DVB type, as indicated by the suffix (H, K, T, or D/00) in the model name,
∙the same settings for satellite channels, including the number of LNB satellites
∙the same hardware type, as indicated by the sticker on the back of the TV, (for example Qxxx.xx.Lx), and
∙compatible software versions.
An onscreen message will notify you if the channel list cannot be copied to the second TV.
Note: If you are prompted to enter a code, enter '8888'.
Copy channel list to USB
1.Connect a USB storage device to the TV with the channels installed on it.
2.Press 
.
3.Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to USB], then press OK. The channel list is copied to the USB storage device.
4.Unplug the USB storage device.
Copy channel list to TV with no channels installed
1.Switch on the TV with no channels installed on it to start the initial installation. Select the language and country. The country setting must be the same as that of the TV whose channel list you want to copy. Skip the search for channels.
EN 40
2.Connect the USB storage device containing the channel list to the TV.
3.Press 
.
4.Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK.The channel list is copied to the TV.
5.Unplug the USB storage device.
Copy channel list to TV with no channels installed
1.Switch on the TV on which you want to copy the channel list.
2.Press 
.
3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.
You will be prompted to select the country where the TV was installed. Make a note of
the current setting and press 
followed by [Cancel] to exit.
4.If the country setting on the TV is different from that of the TV whose channel list you
want to copy, reinstall the TV and select the country setting to match the first TV. See Set up your TV > Reinstall the TV (Page 42).
5.Connect the USB storage device containing the channel list to the TV where you want to copy the channel list.
6.Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK. The channel list is copied to the TV storage device.
7.Unplug the USB storage device.
Menu language
1.While you watch TV, press 
.
2.Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3.Select a menu language from the list, then press OK.