Onscreen Help
What you need
Before you update the onscreen [Help], make sure that you have the following:
∙A USB storage device that is FAT or
∙A PC with Internet access.
∙An archive utility that supports the ZIP file format (for example, WinZip for Microsoft Windows or Stufflt for Macintosh).
Note: Do not use a USB hard drive.
Download the latest file
1.Insert a USB storage device into the USB connector on your PC.
2.Create a folder named ‘upgrades’ in the root directory of the USB storage device.
3.In your web browser, navigate to www.philips.com/support.
4.At the Philips Support site, find your product and locate the [Help] file for your TV. The file (a *.upg file) is compressed into a *.zip archive.
5.If the [Help] file is a later version than the file in your TV, click it.
6.Save it to your PC.
7.Using an archive utility, extract the *.upg file from the *.zip file.
8.Save the *.upg file to the ‘upgrades’ folder in the USB storage device.
9.Disconnect the USB storage device from the PC.
Update [Help]
∙Do not switch off the TV or remove the USB storage device during the update.
∙If a power failure occurs during the update, do not remove the USB storage device from the TV. The TV continues to update as soon as power is restored.
∙If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care.
1.Switch on the TV.
2.Disconnect all other USB devices from the TV.
3.Connect the USB storage device containing the *.upg file to the USB connector on the TV.
4.Press 
.
5.Select [Setup] > [Software settings] > [Local updates] .
The updates screen appears.
6.Select the '*.upg' file and press OK.
A message displays the update status.
7.Follow the onscreen instructions to complete the update and restart your TV.
Reinstall the TV
Reinstall your TV to reset all picture and sound settings and reinstall all TV channels.
1.Press 
.
2.Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN 42