Philips SACD1000 manual Language, Features

Speaker settings

Allows you to select speaker settings, volume balance and delay time, and to test the speaker settings. Speaker settings are only active on the Multi-channel Audio Out Outputs. Speaker settings will not be used during playback in the SACD Stereo or Multi-channel Sound modes.

Karaoke vocal

Switch this setting to ON only when a multi-channel karaoke DVD is being played. The karaoke channels on the disc will then be mixed to a normal stereo sound.

rLanguage

Select the required Menu, Audio and Subtitle language. Menu language - The On-screen Menus will be displayed in the language you select. You can choose from 8 different languages.

Audio language - The sound as well as the DVD menu will be in the language you select, provided it is available on the disc in play. If not, speech will revert to the first spoken language on the disc. You can choose from 16 different languages.

Subtitle language - The subtitles will be in the language you select, provided it is available on the disc in play. If not, subtitles will revert to the first subtitle language on the disc. You can choose from 16 different languages.

Audio language and Subtitle language can also be adapted via the Menu bar on the screen.

sFeatures

Sound Mode (SACD only)

Selection of default SACD Sound Mode: Stereo or Multi- channel. Sound Mode setting can be changed during playback with the Sound Mode leu on either the player or the remote control. When selecting Multi-channel, make sure your sound mode is set up for Multi-channel reproduction.

Access Control (DVD/VCD only)

Access Control contains the following features:

Disc Lock - When Disc Lock is set to ON, a 4-digit PIN code must be entered in order to play discs.

Parental control - Allows the conditional presentation of DVD discs containing Parental Control information.

Status Window

Displays the current status of the player and is displayed together with the menu bar. In STOP mode, it is displayed together with the ‘Temporary Feedback’ Field in the default screen. See ‘the section On-screen Display information'. Factory setting is ON. Select OFF to suppress display of the Status Window.

Low Power Stand-by

If this setting is set to ON, the player will go in low- power stand-by when the Stand-by key (remote control) is pressed. While in low-power stand-by, scart AUX-I/O will no longer be available. All external equipment connected to it will be ignored.

PBC

This feature allows you to disable or enable the PBC (Playback Control) menu of VCD discs. See under ‘Special VCD features’: Factory settings is ON.

English

OPERATION 25