Philips SACD1000 manual Before requesting service, Symptom Remedy

Before requesting service

	If the SACD player appears to be faulty, consult this checklist first. You
	may have overlooked something simple.
	Under no circumstances may you attempt to repair the system yourself;
	this will invalidate the warranty.
	Look for the specific symptom(s). Then perform only the actions listed
	to remedy the specific symptom(s).
Symptom	Remedy
No power	Check to ensure that both plugs of the power cord are properly connected.
	Check whether there is power at the AC outlet by plugging in another
	appliance.
No sound	Check audio connections.
	If using a HiFi amplifier, try another sound source.
	DTS-CDs do not play on the SACD1000.
Distorted sound from HiFi amplifier	Check to make sure that no audio connections are made to the
	amplifier's phono input.
Disc will not play	Make sure the disc label is facing upward.
	Clean the disc.
	Check whether the disc is defective by trying another disc.
No picture	Check to make sure that the TV is switched on.
	Check the video connection.
Distorted picture	Check the disc for fingerprints and clean with a soft cloth, wiping from
	the center to the edge.
	Sometimes a small amount of picture distortion may appear. This is not
	a malfunction.
Completely distorted picture
with player menu	The NTSC/PAL switch may be in the wrong status. Press the 9 STOP
	and T NEXT keys simultaneously and keep them pressed while you
	turn the player ON.
No color in picture with player menu	The NTSC/PAL switch may be in the wrong status. Press the 9 STOP
	and T NEXT keys simultaneously and keep them pressed while you
	turn the player ON.
No return to start-up screen
when disc is removed	Reset by switching the player off, then on again.
	Check to see if the program requires another disc to be loaded.
The player does not respond to
the remote control	Aim the remote control directly at the sensor on the front of the
	player. Avoid all obstacles that may interfere with the signal's path.
	Inspect or replace the batteries.
	Check device code setting. See the section ‘Remote control device code’.
Distorted or black-and-white picture
with DVD or Video CD disc	Use only discs that match the TV system for the TV set being used
	(PAL/NTSC).
No audio at digital output	Check the digital connections.
	Check the settings menu to make sure that the digital output is set to on.
	Check to ensure that the audio format of the selected audio language
	matches your receiver's capabilities.
Buttons do not work	Reset by switching the player OFF then ON again

English

BEFORE REQUESTING SERVICE 37