Philips SACD1000 manual Loading DVDs or VCDs, Playing a DVD-video disc, Playing a video CD

Loading DVDs or VCDs

STOPPLAYPAUSE

REPEAT PREVNEXT

OPEN/CLOSE

1Press / OPEN/CLOSE on the front of the player. The disc loading tray will open.

2Lay the disc in the tray, label side up (also when a double-sided DVD is inserted). Make sure it is properly inserted in the correct recess.

3Gently push the tray, or press / OPEN/CLOSE, to close the tray.

➤ READING will appear in the status window and on the player display and playback will start automatically.

Note: If a DVD is inserted and ‘Disc Lock’ is set to ON but the inserted disc is not in the ‘child safe’ list (not authorized), the PIN code must be entered and/or the disc must be authorized (see ‘Access Control’) before it will play.

Playing a DVD-video disc

Playing a title

➤After inserting the disc and closing the tray, playback will start automatically and the status window and the player display will indicate the type of disc loaded as well as information about the disc’s contents and playing time. The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numeric key 0-9; if not, use the w/v, t/u (down/up/left/right) keys to highlight your selection, and press OK.

➤The currently-playing title and chapter number will be displayed in the menu bar and the player display. The elapsed playing time will be indicated in the status window and on the player display.

➤At the beginning of each title, the number of front channels and surround channels will be displayed (e.g. 3/2). If a subwoofer channel is present this will also be displayed (+1).

➤If the audio format (MPEG 2, Dolby Digital, etc.) of a title changes during play, this will be indicated on the display.

●If required, you can use the SOUND MODE key to select Stereo, Dolby Surround, 3D-Sound or Multi-channel reproduction. Play may stop at the end of the Title; this can result in returning to menu.

●To stop play at any time, press 9 STOP.

➤The default screen will then appear, giving information about the current status of the player.

●You can resume play from the point at which you stopped by pressing e RESUME.

➤The resume feature applies not only to the disc in the player, but also to the last four discs you have played. Simply reload the disc, press 2 PLAY and press 2 PLAY again when you see the Resume icon e on the screen.

Note: Because it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs may have an optional region code. If you load a disc with a different region code than your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded.

Playing a video CD

Playing a disc

-After inserting the disc and closing the tray, playback willl start automatically. The status window and the player display will indicate the type of disc loaded as well as information about the disc’s contents and playing time.

-The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numeric key 0-9.

-The track number currently playing will be displayed in the menu bar and the player display. The elapsed playing time will be indicated in the status window and the player display.

● If required, you can use the SOUND MODE key to select Stereo, Dolby Surround or 3D-Sound reproduction.

● To stop play at any time, press 9 STOP.

➤The default screen will then appear.

●You can resume play from the point at which you stopped by pressing e RESUME. The resume feature applies not only to the disc in the player, but also to the last four discs you have played. Simply reload the disc, press 2 PLAY and press 2 PLAY again when you see the Resume icon e on the screen.

English

OPERATION - VIDEO 31